From New World Encyclopedia
Revision as of 15:50, 27 April 2023 by Rosie Tanabe (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This article is about the astronomical object.
The Pleiades, an open cluster of stars in the constellation of Taurus. NASA photo.

A star is a massive, luminous ball of plasma that is held together by its own gravity. The nearest star to Earth is the Sun, which is the source of most of the energy on Earth. Other stars are visible in the night sky, when they are not outshone by the Sun. For most of its life, a star shines due to thermonuclear fusion in its core releasing energy that traverses the star's interior and then radiates into outer space. Almost all elements heavier than hydrogen and helium were created by fusion processes in stars.

Astronomers can determine the mass, age, chemical composition and many other properties of a star by observing its spectrum, luminosity and motion through space. The total mass of a star is the principal determinant in its evolution and eventual fate. Other characteristics of a star are determined by its evolutionary history, including the diameter, rotation, movement and temperature. A plot of the temperature of many stars against their luminosities, known as a Hertzsprung-Russell diagram (H–R diagram), allows the age and evolutionary state of a star to be determined.

Binary and multi-star systems consist of two or more stars that are gravitationally bound, and generally move around each other in stable orbits. When two such stars have a relatively close orbit, their gravitational interaction can have a significant impact on their evolution.[1] Stars can form part of a much larger gravitationally bound structure, such as a cluster or a galaxy.

Observation history

Historically, stars have been important to civilizations throughout the world. They have been used in religious practices and for celestial navigation and orientation. Many ancient astronomers believed that stars were permanently affixed to a heavenly sphere, and that they were immutable. By convention, astronomers grouped stars into constellations and used them to track the motions of the planets and the inferred position of the Sun.[2] The motion of the Sun against the background stars (and the horizon) was used to create calendars, which could be used to regulate agricultural practices.[3] The Gregorian calendar, currently used nearly everywhere in the world, is a solar calendar based on the angle of the Earth's rotational axis relative to the nearest star, the Sun.

The oldest accurately dated star chart appeared in Ancient Egypt in 1,534 B.C.E.[4] Islamic astronomers gave to many stars Arabic names which are still used today, and they invented numerous astronomical instruments which could compute the positions of the stars. In the 11th century, Abū Rayhān al-Bīrūnī described the Milky Way galaxy as multitude of fragments having the properties of nebulous stars, and also gave the latitudes of various stars during a lunar eclipse in 1019.

In spite of the apparent immutability of the heavens, Chinese astronomers were aware that new stars could appear.[5] Early European astronomers such as Tycho Brahe identified new stars in the night sky (later termed novae), suggesting that the heavens were not immutable. In 1584 Giordano Bruno suggested that the stars were actually other suns, and may have other planets, possibly even Earth-like, in orbit around them,[6] an idea that had been suggested earlier by such ancient Greek philosophers as Democritus and Epicurus. By the following century the idea of the stars as distant suns was reaching a consensus among astronomers. To explain why these stars exerted no net gravitational pull on the solar system, Isaac Newton suggested that the stars were equally distributed in every direction, an idea prompted by the theologian Richard Bentley.[7]

The Italian astronomer Geminiano Montanari recorded observing variations in luminosity of the star Algol in 1667. Edmond Halley published the first measurements of the proper motion of a pair of nearby "fixed" stars, demonstrating that they had changed positions from the time of the ancient Greek astronomers Ptolemy and Hipparchus. The first direct measurement of the distance to a star (61 Cygni at 11.4 light-years) was made in 1838 by Friedrich Bessel using the parallax technique. Parallax measurements demonstrated the vast separation of the stars in the heavens.[6]

William Herschel was the first astronomer to attempt to determine the distribution of stars in the sky. During the 1780s, he performed a series of gauges in 600 directions, and counted the stars observed along each line of sight. From this he deduced that the number of stars steadily increased toward one side of the sky, in the direction of the Milky Way core. His son John Herschel repeated this study in the southern hemisphere and found a corresponding increase in the same direction.[8] In addition to his other accomplishments, William Herschel is also noted for his discovery that some stars do not merely lie along the same line of sight, but are also physical companions that form binary star systems.

The science of stellar spectroscopy was pioneered by Joseph von Fraunhofer and Angelo Secchi. By comparing the spectra of stars such as Sirius to the Sun, they found differences in the strength and number of their absorption lines—the dark lines in a stellar spectra due to the absorption of specific frequencies by the atmosphere. In 1865 Secchi began classifying stars into spectral types. However, the modern version of the stellar classification scheme was developed by Annie J. Cannon during the 1900s.

Observation of double stars gained increasing importance during the nineteenth century. In 1834, Friedrich Bessel observed changes in the proper motion of the star Sirius, and inferred a hidden companion. Edward Pickering discovered the first spectroscopic binary in 1899 when he observed the periodic splitting of the spectral lines of the star Mizar in a 104 day period. Detailed observations of many binary star systems were collected by astronomers such as William Struve and S. W. Burnham, allowing the masses of stars to be determined from computation of the orbital elements. The first solution to the problem of deriving an orbit of binary stars from telescope observations was made by Felix Savary in 1827.[9]

The twentieth century saw increasingly rapid advances in the scientific study of stars. The photograph became a valuable astronomical tool. Karl Schwarzschild discovered that the color of a star, and hence its temperature, could be determined by comparing the visual magnitude against the photographic magnitude. The development of the photoelectric photometer allowed very precise measurements of magnitude at multiple wavelength intervals. In 1921 Albert A. Michelson made the first measurements of a stellar diameter using an interferometer on the Hooker telescope.[10]

Important conceptual work on the physical basis of stars occurred during the first decades of the twentieth century. In 1913, the Hertzsprung-Russell diagram was developed, propelling the astrophysical study of stars. Successful models were developed to explain the interiors of stars and stellar evolution. The spectra of stars were also successfully explained through advances in quantum physics. This allowed the chemical composition of the stellar atmosphere to be determined.[11]

With the exception of supernovae, individual stars have primarily been observed in our Local Group of galaxies,[12] and especially in the visible part of the Milky Way (as demonstrated by the detailed star catalogues available for our galaxy.[13]) But some stars have been observed in the M100 galaxy of the Virgo Cluster, about 100 million light years from the Earth.[14] In the Local Supercluster it is possible to see star clusters, and current telescopes could in principle observe faint individual stars in the Local Cluster—the most distant stars resolved have up to hundred million light years away[15] (see Cepheids). However, outside the Local Supercluster of galaxies, few individual stars or clusters of stars have been observed. Exceptions include a faint image of a large star cluster containing hundreds of thousands of stars located one billion light years away[16]—ten times the distance of the most distant star cluster previously observed; and an individual star at a distance of 9 billion light-years.[17]

Star designations

The concept of the constellation was known to exist during the Babylonian period. Ancient sky watchers imagined that prominent arrangements of stars formed patterns, and they associated these with particular aspects of nature or their myths. Twelve of these formations lay along the band of the ecliptic and these became the basis of astrology. Many of the more prominent individual stars were also given names, particularly with Arabic or Latin designations.

As well as certain constellations and the Sun itself, stars as a whole have their own myths.[18] They were thought to be the souls of the dead or gods. An example is the star Algol, which was thought to represent the eye of the Gorgon Medusa.

To the Ancient Greeks, some "stars," known as planets (Greek πλανήτης (planētēs), meaning "wanderer"), represented various important deities, from which the names of the planets Mercury, Venus, Mars, Jupiter and Saturn were taken.[18] (Uranus and Neptune were also Greek and Roman gods, but neither planet was known in Antiquity because of their low brightness. Their names were assigned by later astronomers).

Circa 1600, the names of the constellations were used to name the stars in the corresponding regions of the sky. The German astronomer Johann Bayer created a series of star maps and applied Greek letters as designations to the stars in each constellation. Later the English astronomer John Flamsteed came up with a system using numbers, which would later be known as the Flamsteed designation. Numerous additional systems have since been created as star catalogues have appeared.

The only body which has been recognized by the scientific community as having the authority to name stars or other celestial bodies is the International Astronomical Union (IAU).[19] A number of private companies (for instance, the "International Star Registry") purport to sell names to stars; however, these names are neither recognized by the scientific community nor used by them,[19] and many in the astronomy community view these organizations as frauds preying on people ignorant of star naming procedure.[20]

Units of measurement

Most stellar parameters are expressed in SI units by convention, but CGS units are also used (e.g., expressing luminosity in ergs per second). Mass, luminosity, and radii are usually given in solar units, based on the characteristics of the Sun:

solar mass:  kg[21]
solar luminosity:  watts[21]
solar radius: m[22]

Large lengths, such as the radius of a giant star or the semi-major axis of a binary star system, are often expressed in terms of the astronomical unit (AU)—approximately the mean distance between the Earth and the Sun (150 million km or 93 million miles).

Formation and evolution

A star begins as a collapsing cloud of material composed primarily of hydrogen, along with helium and trace amounts of heavier elements. Once the stellar core is sufficiently dense, some of the hydrogen is steadily converted into helium through the process of nuclear fusion.[23] The remainder of the star's interior carries energy away from the core through a combination of radiative and convective processes. The star's internal pressure prevents it from collapsing further under its own gravity. Once the hydrogen fuel at the core is exhausted, those stars having at least 0.4 times the mass of the Sun[24] expand to become a red giant, in some cases fusing heavier elements at the core or in shells around the core. The star then evolves into a degenerate form, recycling a portion of the matter into the interstellar environment, where it will form a new generation of stars with a higher proportion of heavy elements.

Stars are formed within extended regions of higher density in the interstellar medium, although the density is still lower than the inside of an earthly vacuum chamber. These regions are called molecular clouds and consist mostly of hydrogen, with about 23–28% helium and a few percent heavier elements. One example of such a star-forming region is the Orion Nebula.[25] As massive stars are formed from molecular clouds, they powerfully illuminate those clouds. They also ionize the hydrogen, creating an H II region.

Protostar formation

The formation of a star begins with a gravitational instability inside a molecular cloud, often triggered by shockwaves from supernovae (massive stellar explosions) or the collision of two galaxies (as in a starburst galaxy). Once a region reaches a sufficient density of matter to satisfy the criteria for Jeans Instability it begins to collapse under its own gravitational force.

As the cloud collapses, individual conglomerations of dense dust and gas form what are known as Bok globules. These can contain up to 50 solar masses of material. As a globule collapses and the density increases, the gravitational energy is converted into heat and the temperature rises. When the protostellar cloud has approximately reached the stable condition of hydrostatic equilibrium, a protostar forms at the core.[26] These pre-main sequence stars are often surrounded by a protoplanetary disk. The period of gravitational contraction lasts for about 10–15 million years.

Early stars of less than 2 solar masses are called T Tauri stars, while those with greater mass are Herbig Ae/Be stars. These newly born stars emit jets of gas along their axis of rotation, producing small patches of nebulosity known as Herbig-Haro objects.[27]

Main sequence

Main article: Main sequence

Stars spend about 90 percent of their lifetime fusing hydrogen to produce helium in high-temperature and high-pressure reactions near the core. Such stars are said to be on the main sequence and are called dwarf stars. Starting at zero-age main sequence, the proportion of helium in a star's core will steadily increase. As a consequence, in order to maintain the required rate of nuclear fusion at the core, the star will slowly increase in temperature and luminosity.[28] The Sun, for example, is estimated to have increased in luminosity by about 40 percent since it reached the main sequence 4.6 billion years ago.[29]

Every star generates a stellar wind of particles that causes a continual outflow of gas into space. For most stars, the amount of mass lost is negligible. The Sun loses 10−14 solar masses every year,[30] or about 0.01 percent of its total mass over its entire lifespan. However very massive stars can lose 10−7 to 10−5 solar masses each year, significantly affecting their evolution.[31]

An example of a Hertzsprung-Russell diagram for a set of stars that includes the Sun (center). (See "Classification" below.)

The duration that a star spends on the main sequence depends primarily on the amount of fuel it has to fuse and the rate at which it fuses that fuel. In other words, its initial mass and its luminosity. For the Sun, this is estimated to be about 1010 years. Large stars consume their fuel very rapidly and are short-lived. Small stars (called red dwarfs) consume their fuel very slowly and last tens to hundreds of billions of years. At the end of their lives, they simply become dimmer and dimmer.[24] However, since the lifespan of such stars is greater than the current age of the universe (13.7 billion years), no such stars are expected to exist yet.

Besides mass, the portion of elements heavier than helium can play a significant role in the evolution of stars. In astronomy all elements heavier than helium are considered a "metal," and the chemical concentration of these elements is called the metallicity. The metallicity can influence the duration that a star will burn its fuel, control the formation of magnetic fields and modify the strength of the stellar wind. Older, population II stars have substantially less metallicity than the younger, population I stars due to the composition of the molecular clouds from which they formed. (Over time these clouds become increasingly enriched in heavier elements as older stars die and shed portions of their atmospheres.)

Post-main sequence

As stars of at least 0.4 solar masses[24] exhaust their supply of hydrogen at their core, their outer layers expand greatly and cool to form a red giant. For example, in about 5 billion years, when the Sun is a red giant, it will expand out to a maximum radius of roughly 1 AU (150,000,000 km), 250 times its present size. As a giant, the Sun will lose roughly 30 percent of its current mass.[29][32]

In a red giant of up to 2.25 solar masses, hydrogen fusion proceeds in a shell-layer surrounding the core.[33] Eventually the core is compressed enough to start helium fusion, and the star now gradually shrinks in radius and increases its surface temperature. For larger stars, the core region transitions directly from fusing hydrogen to fusing helium.[34]

After the star has consumed the helium at the core, fusion continues in a shell around a hot core of carbon and oxygen. The star then follows an evolutionary path that parallels the original red giant phase, but at a higher surface temperature.

Massive stars

Betelgeuse is a red supergiant star approaching the end of its life cycle

During their helium-burning phase, very high mass stars with more than nine solar masses expand to form red supergiants. Once this fuel is exhausted at the core, they can continue to fuse elements heavier than helium.

The core contracts until the temperature and pressure are sufficient to fuse carbon (see carbon burning process). This process continues, with the successive stages being fueled by neon (see neon burning process), oxygen (see oxygen burning process), and silicon (see silicon burning process). Near the end of the star's life, fusion can occur along a series of onion-layer shells within the star. Each shell fuses a different element, with the outermost shell fusing hydrogen; the next shell fusing helium, and so forth.[35]

The final stage is reached when the star begins producing iron. Since iron nuclei are more tightly bound than any heavier nuclei, if they are fused they do not release energy—the process would, on the contrary, consume energy. Likewise, since they are more tightly bound than all lighter nuclei, energy cannot be released by fission.[33] In relatively old, very massive stars, a large core of inert iron will accumulate in the center of the star. The heavier elements in these stars can work their way up to the surface, forming evolved objects known as Wolf-Rayet stars that have a dense stellar wind which sheds the outer atmosphere.


An evolved, average-size star will now shed its outer layers as a planetary nebula. If what remains after the outer atmosphere has been shed is less than 1.4 solar masses, it shrinks to a relatively tiny object (about the size of Earth) that is not massive enough for further compression to take place, known as a white dwarf.[36] The electron-degenerate matter inside a white dwarf is no longer a plasma, even though stars are generally referred to as being spheres of plasma. White dwarfs will eventually fade into black dwarfs over a very long stretch of time.

The Crab Nebula, remnants of a supernova that was first observed around 1050 C.E.

In larger stars, fusion continues until the iron core has grown so large (more than 1.4 solar masses) that it can no longer support its own mass. This core will suddenly collapse as its electrons are driven into its protons, forming neutrons and neutrinos in a burst of inverse beta decay, or electron capture. The shockwave formed by this sudden collapse causes the rest of the star to explode in a supernova. Supernovae are so bright that they may briefly outshine the star's entire home galaxy. When they occur within the Milky Way, supernovae have historically been observed by naked-eye observers as "new stars" where none existed before.[37]

Most of the matter in the star is blown away by the supernovae explosion (forming nebulae such as the Crab Nebula[37]) and what remains will be a neutron star (which sometimes manifests itself as a pulsar or X-ray burster) or, in the case of the largest stars (large enough to leave a stellar remnant greater than roughly 4 solar masses), a black hole.[38] In a neutron star the matter is in a state known as neutron-degenerate matter, with a more exotic form of degenerate matter, QCD matter, possibly present in the core. Within a black hole the matter is in a state that is not currently understood.

The blown-off outer layers of dying stars include heavy elements which may be recycled during new star formation. These heavy elements allow the formation of rocky planets. The outflow from supernovae and the stellar wind of large stars play an important part in shaping the interstellar medium.[37]


A white dwarf star in orbit around Sirius (artist's impression). NASA image

In addition to isolated stars, a multi-star system can consist of two or more gravitationally bound stars that orbit around each other. The most common multi-star system is a binary star, but systems of three or more stars are also found. For reasons of orbital stability, such multi-star systems are often organized into hierarchical sets of co-orbiting binary stars.[39] Larger groups called star clusters also exist. These range from loose stellar associations with only a few stars, up to enormous globular clusters with hundreds of thousands of stars.

It has been a long-held assumption that the majority of stars occur in gravitationally bound, multiple-star systems. This is particularly true for very massive O and B class stars, where 80 percent of the systems are believed to be multiple. However the portion of single star systems increases for smaller stars, so that only 25 percent of red dwarfs are known to have stellar companions. As 85 percent of all stars are red dwarfs, most stars in the Milky Way are likely single from birth.[40]

Stars are not spread uniformly across the universe, but are normally grouped into galaxies along with interstellar gas and dust. A typical galaxy contains hundreds of billions of stars. According to a team of astronomers led by Christopher Conselice, the universe contains at least two trillion galaxies, ten times more than previously thought.[41] While it is often believed that stars only exist within galaxies, intergalactic stars have been discovered.[42] Astronomers estimate that there are at least 70 sextillion (7×1022) stars in the observable universe.[43]

The nearest star to the Earth, apart from the Sun, is Proxima Centauri, which is 39.9 trillion (1012) kilometers, or 4.2 light-years away. Light from Proxima Centauri takes 4.2 years to reach Earth. Travelling at the orbital speed of the Space Shuttle (5 miles per second—almost 30,000 kilometers per hour), it would take about 150,000 years to get there.[44] Distances like this are typical inside galactic discs, including in the vicinity of the solar system.[45] Stars can be much closer to each other in the centers of galaxies and in globular clusters, or much farther apart in galactic halos.

Due to the relatively vast distances between stars outside the galactic nucleus, collisions between stars are thought to be rare. In denser regions such as the core of globular clusters or the galactic center, collisions can be more common.[46] Such collisions can produce what are known as blue stragglers. These abnormal stars have a higher surface temperature than the other main sequence stars with the same luminosity in the cluster.[47]


The Sun is the nearest star to Earth

Almost everything about a star is determined by its initial mass, including essential characteristics such as luminosity and size, as well as the star's evolution, lifespan, and eventual fate.


Most stars are between 1 billion and 10 billion years old. Some stars may even be close to 13.7 billion years old—the observed age of the universe. The oldest star yet discovered, HE 1523-0901, is an estimated 13.2 billion years old.[48]

The more massive the star, the shorter its lifespan, primarily because massive stars have greater pressure on their cores, causing them to burn hydrogen more rapidly. The most massive stars last an average of about one million years, while stars of minimum mass (red dwarfs) burn their fuel very slowly and last tens to hundreds of billions of years.

Chemical composition

When stars form they are composed of about 70 percent hydrogen and 28 percent helium, as measured by mass, with a small fraction of heavier elements. Typically the portion of heavy elements is measured in terms of the iron content of the stellar atmosphere, as iron is a common element and its absorption lines are relatively easy to measure. Because the molecular clouds where stars form are steadily enriched by heavier elements from supernovae explosions, a measurement of the chemical composition of a star can be used to infer its age. The portion of heavier elements may also be an indicator of the likelihood that the star has a planetary system.[49]

The star with the lowest iron content ever measured is the dwarf HE1327-2326, with only 1/200,000th the iron content of the Sun.[50] By contrast, the super-metal-rich star μ Leonis has nearly double the abundance of iron as the Sun, while the planet-bearing star 14 Herculis has nearly triple the iron.[51] There also exist chemically peculiar stars that show unusual abundances of certain elements in their spectrum; especially chromium and rare earth elements.[52]


Due to their great distance from the Earth, all stars except the Sun appear to the human eye as shining points in the night sky that twinkle because of the effect of the Earth's atmosphere. The Sun is also a star, but it is close enough to the Earth to appear as a disk instead, and to provide daylight. Other than the Sun, the star with the largest apparent size is R Doradus, with an angular diameter of only 0.057 arcseconds.[53]

The disks of most stars are much too small in angular size to be observed with current ground-based optical telescopes, and so interferometer telescopes are required in order to produce images of these objects. Another technique for measuring the angular size of stars is through occultation. By precisely measuring the drop in brightness of a star as it is occulted by the Moon (or the rise in brightness when it reappears), the star's angular diameter can be computed.[54]

Stars range in size from neutron stars, which vary anywhere from 20 to 40 km in diameter, to supergiants like Betelgeuse in the Orion constellation, which has a diameter approximately 650 times larger than the Sun—about 0.9 billion kilometers. However, Betelgeuse has a much lower density than the Sun.[55]


The motion of a star relative to the Sun can provide useful information about the origin and age of a star, as well as the structure and evolution of the surrounding galaxy. The components of motion of a star consist of the radial velocity toward or away from the Sun, and the traverse angular movement, which is called its proper motion.

Radial velocity is measured by the doppler shift of the star's spectral lines, and is given in units of km/s. The proper motion of a star is determined by precise astrometric measurements in units of milli-arc seconds (mas) per year. By determining the parallax of a star, the proper motion can then be converted into units of velocity. Stars with high rates of proper motion are likely to be relatively close to the Sun, making them good candidates for parallax measurements.[56]

Once both rates of movement are known, the space velocity of the star relative to the Sun or the galaxy can be computed. Among nearby stars, it has been found that population I stars have generally lower velocities than older, population II stars. The latter have elliptical orbits that are inclined to the plane of the galaxy.[57] Comparison of the kinematics of nearby stars has also led to the identification of stellar associations. These are most likely groups of stars that share a common point of origin in giant molecular clouds.

Magnetic field

Surface magnetic field of SU Aur (a young star of T Tauri type), reconstructed by means of Zeeman-Doppler imaging

The magnetic field of a star is generated within regions of the interior where convective circulation occurs. This movement of conductive plasma functions like a dynamo, generating magnetic fields that extend throughout the star. The strength of the magnetic field varies with the mass and composition of the star, and the amount of magnetic surface activity depends upon the star's rate of rotation. This surface activity produces starspots, which are regions of strong magnetic fields and lower than normal surface temperatures. Coronal loops are arching magnetic fields that reach out into the corona from active regions. Stellar flares are bursts of high-energy particles that are emitted due to the same magnetic activity.[58]

Young, rapidly rotating stars tend to have high levels of surface activity because of their magnetic field. The magnetic field can act upon a star's stellar wind, however, functioning as a brake to gradually slow the rate of rotation as the star grows older. Thus, older stars such as the Sun have a much slower rate of rotation and a lower level of surface activity. The activity levels of slowly rotating stars tend to vary in a cyclical manner and can shut down altogether for periods.[59] During the Maunder minimum, for example, the Sun underwent a 70-year period with almost no sunspot activity.


One of the most massive stars known is Eta Carinae,[60] with 100–150 times as much mass as the Sun; its lifespan is very short—only several million years at most. A recent study of the Arches cluster suggests that 150 solar masses is the upper limit for stars in the current era of the universe.[61] The reason for this limit is not precisely known, but it is partially due to the Eddington luminosity which defines the maximum amount of luminosity that can pass through the atmosphere of a star without ejecting the gases into space.

The reflection nebula NGC 1999 is brilliantly illuminated by V380 Orionis (center), a variable star with about 3.5 times the mass of the Sun. NASA image

The first stars to form after the Big Bang may have been larger, up to 300 solar masses or more,[62] due to the complete absence of elements heavier than lithium in their composition. This generation of supermassive, population III stars is long extinct, however, and currently only theoretical.

With a mass only 93 times that of Jupiter, AB Doradus C, a companion to AB Doradus A, is the smallest known star undergoing nuclear fusion in its core.[63] For stars with similar metallicity to the Sun, the theoretical minimum mass the star can have, and still undergo fusion at the core, is estimated to be about 75 times the mass of Jupiter.[64] When the metallicity is very low, however, a recent study of the faintest stars found that the minimum star size seems to be about 8.3 percent of the solar mass, or about 87 times the mass of Jupiter.[65][64] Smaller bodies are called brown dwarfs, which occupy a poorly defined grey area between stars and gas giants.

The combination of the radius and the mass of a star determines the surface gravity. Giant stars have a much lower surface gravity than main sequence stars, while the opposite is the case for degenerate, compact stars such as white dwarfs. The surface gravity can influence the appearance of a star's spectrum, with higher gravity causing a broadening of the absorption lines.[11]


The rotation rate of stars can be approximated through spectroscopic measurement, or more exactly determined by tracking the rotation rate of starspots. Young stars can have a rapid rate of rotation greater than 100 km/s at the equator. The B-class star Achernar, for example, has an equatorial rotation velocity of about 225 km/s or greater, giving it an equatorial diameter that is more than 50 percent larger than the distance between the poles. This rate of rotation is just below the critical velocity of 300 km/s where the star would break apart.[66] By contrast, the Sun only rotates once every 25 – 35 days, with an equatorial velocity of 1.994 km/s. The star's magnetic field and the stellar wind serve to slow down a main sequence star's rate of rotation by a significant amount as it evolves on the main sequence.[67]

Degenerate stars have contracted into a compact mass, resulting in a rapid rate of rotation. However they have relatively low rates of rotation compared to what would be expected by conservation of angular momentum—the tendency of a rotating body to compensate for a contraction in size by increasing its rate of spin. A large portion of the star's angular momentum is dissipated as a result of mass loss through the stellar wind.[68] In spite of this, the rate of rotation for a pulsar can be very rapid. The pulsar at the heart of the Crab nebula, for example, rotates 30 times per second.[69] The rotation rate of the pulsar will gradually slow due to the emission of radiation.


The surface temperature of a main sequence star is determined by the rate of energy production at the core and the radius of the star and is often estimated from the star's color index.[70] It is normally given as the effective temperature, which is the temperature of an idealized black body that radiates its energy at the same luminosity per surface area as the star. Note that the effective temperature is only a representative value, however, as stars actually have a temperature gradient that decreases with increasing distance from the core.[71] The temperature in the core region of a star is several million kelvins.[72]

The stellar temperature will determine the rate of energization or ionization of different elements, resulting in characteristic absorption lines in the spectrum. The surface temperature of a star, along with its visual absolute magnitude and absorption features, is used to classify a star (see classification below).[11]

Massive main sequence stars can have surface temperatures of 50,000 K. Smaller stars such as the Sun have surface temperatures of a few thousand degrees. Red giants have relatively low surface temperatures of about 3,600 K, but they also have a high luminosity due to their large exterior surface area.[73]


The energy produced by stars, as a by-product of nuclear fusion, radiates into space as both electromagnetic radiation and particle radiation. The particle radiation emitted by a star is manifested as the stellar wind[74] (which exists as a steady stream of electrically charged particles, such as free protons, alpha particles, and beta particles, emanating from the star’s outer layers) and as a steady stream of neutrinos emanating from the star’s core.

The production of energy at the core is the reason why stars shine so brightly: every time two or more atomic nuclei of one element fuse together to form an atomic nucleus of a new heavier element, gamma ray photons are released from the nuclear fusion reaction. This energy is converted to other forms of electromagnetic energy, including visible light, by the time it reaches the star’s outer layers.

The color of a star, as determined by the peak frequency of the visible light, depends on the temperature of the star’s outer layers, including its photosphere.[75] Besides visible light, stars also emit forms of electromagnetic radiation that are invisible to the human eye. In fact, stellar electromagnetic radiation spans the entire electromagnetic spectrum, from the longest wavelengths of radio waves and infrared to the shortest wavelengths of ultraviolet, X-rays, and gamma rays. All components of stellar electromagnetic radiation, both visible and invisible, are typically significant.

Using the stellar spectrum, astronomers can also determine the surface temperature, surface gravity, metallicity and rotational velocity of a star. If the distance of the star is known, such as by measuring the parallax, then the luminosity of the star can be derived. The mass, radius, surface gravity, and rotation period can then be estimated based on stellar models. (Mass can be measured directly for stars in binary systems. The technique of gravitational microlensing will also yield the mass of a star.[76]) With these parameters, astronomers can also estimate the age of the star.[77]


In astronomy, luminosity is the amount of light, and other forms of radiant energy, a star radiates per unit of time. The luminosity of a star is determined by the radius and the surface temperature. However, many stars do not radiate a uniform flux—the amount of energy radiated per unit area—across their entire surface. The rapidly rotating star Vega, for example, has a higher energy flux at its poles than along its equator.[78]

Surface patches with a lower temperature and luminosity than average are known as starspots. Small, dwarf stars such as the Sun generally have essentially featureless disks with only small starspots. Larger, giant stars have much bigger, much more obvious starspots,[79] and they also exhibit strong stellar limb darkening. That is, the brightness decreases towards the edge of the stellar disk.[80] Red dwarf flare stars such as UV Ceti may also possess prominent starspot features.[81]


The apparent brightness of a star is measured by its apparent magnitude, which is the brightness of a star with respect to the star’s luminosity, distance from Earth, and the altering of the star’s light as it passes through Earth’s atmosphere. Intrinsic or absolute magnitude is what the apparent magnitude a star would be if the distance between the Earth and the star were 10 parsecs (32.6 light-years), and it is directly related to a star’s luminosity.

Number of stars brighter than magnitude
of Stars[82]
0 4
1 15
2 48
3 171
4 513
5 1,602
6 4,800
7 14,000

Both the apparent and absolute magnitude scales are logarithmic units: one whole number difference in magnitude is equal to a brightness variation of about 2.5 times[83] (the 5th root of 100 or approximately 2.512). This means that a first magnitude (+1.00) star is about 2.5 times brighter than a second magnitude (+2.00) star, and approximately 100 times brighter than a sixth magnitude (+6.00) star. The faintest stars visible to the naked eye under good seeing conditions are about magnitude +6.

On both apparent and absolute magnitude scales, the smaller the magnitude number, the brighter the star; the larger the magnitude number, the fainter. The brightest stars, on either scale, have negative magnitude numbers. The variation in brightness between two stars is calculated by subtracting the magnitude number of the brighter star (mb) from the magnitude number of the fainter star (mf), then using the difference as an exponent for the base number 2.512; that is to say:

variation in brightness

Relative to both luminosity and distance from Earth, absolute magnitude (M) and apparent magnitude (m) are not equivalent for an individual star;[83] for example, the bright star Sirius has an apparent magnitude of −1.44, but it has an absolute magnitude of +1.41.

The Sun has an apparent magnitude of −26.7, but its absolute magnitude is only +4.83. Sirius, the brightest star in the night sky as seen from Earth, is approximately 23 times more luminous than the Sun, while Canopus, the second brightest star in the night sky with an absolute magnitude of −5.53, is approximately 14,000 times more luminous than the Sun. Despite Canopus being vastly more luminous than Sirius, however, Sirius appears brighter than Canopus. This is because Sirius is merely 8.6 light-years from the Earth, while Canopus is much farther away at a distance of 310 light-years.

As of 2006, the star with the highest known absolute magnitude is LBV 1806-20, with a magnitude of −14.2. This star is at least 5,000,000 times more luminous than the Sun. The least luminous stars that are currently known are located in the NGC 6397 cluster. The faintest red dwarfs in the cluster were magnitude 26, while a 28th magnitude white dwarf was also discovered. These faint stars are so dim that their light is as bright as a birthday candle on the Moon when viewed from the Earth.[84]


Surface Temperature Ranges for
Different Stellar Classes
Class Temperature Sample star
O 33,000 K or more Zeta Ophiuchi
B 10,500–30,000 K Rigel
A 7,500–10,000 K Altair
F 6,000–7,200 K Procyon A
G 5,500–6,000 K Sun
K 4,000–5,250 K Epsilon Indi
M 2,600–3,850 K Proxima Centauri

The current stellar classification system originated in the early twentieth century, when stars were classified from A to Q based on the strength of the hydrogen line.[86] It was not known at the time that the major influence on the line strength was temperature; the hydrogen line strength reaches a peak at around 9000 K, and is weaker at both hotter and cooler temperatures. When the classifications were reordered by temperature, it more closely resembled the modern scheme.[87]

There are different single-letter classifications of stars according to their spectra, ranging from type O, which are very hot, to M, which are so cool that molecules may form in their atmospheres. The main classifications in order of decreasing surface temperature are: O, B, A, F, G, K, and M. A variety of rare spectral types have special classifications. The most common of these are types L and T, which classify the coldest low-mass stars and brown dwarfs. Each letter has 10 sub-divisions, numbered from 0 to 9, in order of decreasing temperature. However, this system breaks down at extreme high temperatures: class O0 and O1 stars may not exist.[88]

In addition, stars may be classified by the luminosity effects found in their spectral lines, which correspond to their spatial size and is determined by the surface gravity. These range from 0 (hypergiants) through III (giants) to V (main sequence dwarfs) and VII (white dwarfs). Most stars belong to the main sequence, which consists of ordinary hydrogen-burning stars. These fall along a narrow, diagonal band when graphed according to their absolute magnitude and spectral type.[88] Our Sun is a main sequence G2V yellow dwarf, being of intermediate temperature and ordinary size.

Additional nomenclature, in the form of lower-case letters, can follow the spectral type to indicate peculiar features of the spectrum. For example, an "e" can indicate the presence of emission lines; "m" represents unusually strong levels of metals, and "var" can mean variations in the spectral type.[88]

White dwarf stars have their own class that begins with the letter D. This is further sub-divided into the classes DA, DB, DC, DO, DZ, and DQ, depending on the types of prominent lines found in the spectrum. This is followed by a numerical value that indicates the temperature index.[89]

Variable stars

The asymmetrical appearance of Mira, an oscillating variable star. NASA HST image

Variable stars have periodic or random changes in luminosity because of intrinsic or extrinsic properties. Of the intrinsically variable stars, the primary types can be subdivided into three principal groups.

During their stellar evolution, some stars pass through phases where they can become pulsating variables. Pulsating variable stars vary in radius and luminosity over time, expanding and contracting with periods ranging from minutes to years, depending on the size of the star. This category includes Cepheid and cepheid-like stars, and long-period variables such as Mira.[90]

Eruptive variables are stars that experience sudden increases in luminosity because of flares or mass ejection events.[90] This group includes protostars, Wolf-Rayet stars, and Flare stars, as well as giant and supergiant stars.

Cataclysmic or explosive variables undergo a dramatic change in their properties. This group includes novae and supernovae. A binary star system that includes a nearby white dwarf can produce certain types of these spectacular stellar explosions, including the nova and a Type 1a supernova.[1] The explosion is created when the white dwarf accretes hydrogen from the companion star, building up mass until the hydrogen undergoes fusion.[91] Some novae are also recurrent, having periodic outbursts of moderate amplitude.[90]

Stars can also vary in luminosity because of extrinsic factors, such as eclipsing binaries, as well as rotating stars that produce extreme starspots.[90] A notable example of an eclipsing binary is Algol, which regularly varies in magnitude from 2.3 to 3.5 over a period of 2.87 days.


The interior of a stable star is in a state of hydrostatic equilibrium: the forces on any small volume almost exactly counterbalance each other. The balanced forces are inward gravitational force and an outward force due to the pressure gradient within the star. The pressure gradient is established by the temperature gradient of the plasma; the outer part of the star is cooler than the core. The temperature at the core of a main sequence or giant star is at least on the order of 107 K. The resulting temperature and pressure at the hydrogen-burning core of a main sequence star are sufficient for nuclear fusion to occur and for sufficient energy to be produced to prevent further collapse of the star.[92][93]

As atomic nuclei are fused in the core, they emit energy in the form of gamma rays. These photons interact with the surrounding plasma, adding to the thermal energy at the core. Stars on the main sequence convert hydrogen into helium, creating a slowly but steadily increasing proportion of helium in the core. Eventually the helium content becomes predominant and energy production ceases at the core. Instead, for stars of more than 0.4 solar masses, fusion occurs in a slowly expanding shell around the degenerate helium core.[94]

In addition to hydrostatic equilibrium, the interior of a stable star will also maintain an energy balance of thermal equilibrium. There is a radial temperature gradient throughout the interior that results in a flux of energy flowing toward the exterior. The outgoing flux of energy leaving any layer within the star will exactly match the incoming flux from below.

This diagram shows a cross-section of a solar-type star. NASA image

The radiation zone is the region within the stellar interior where radiative transfer is sufficiently efficient to maintain the flux of energy. In this region the plasma will not be perturbed and any mass motions will die out. If this is not the case, however, then the plasma becomes unstable and convection will occur, forming a convection zone. This can occur, for example, in regions where very high energy fluxes occur, such as near the core or in areas with high opacity as in the outer envelope.[93]

The occurrence of convection in the outer envelope of a main sequence star depends on the mass. Stars with several times the mass of the Sun have a convection zone deep within the interior and a radiative zone in the outer layers. Smaller stars such as the Sun are just the opposite, with the convective zone located in the outer layers.[95] Red dwarf stars with less than 0.4 solar masses are convective throughout, which prevents the accumulation of a helium core.[24] For most stars the convective zones will also vary over time as the star ages and the constitution of the interior is modified.[93]

The portion of a star that is visible to an observer is called the photosphere. This is the layer at which the plasma of the star becomes transparent to photons of light. From here, the energy generated at the core becomes free to propagate out into space. It is within the photosphere that sun spots, or regions of lower than average temperature, appear.

Above the level of the photosphere is the stellar atmosphere. In a main sequence star such as the Sun, the lowest level of the atmosphere is the thin chromosphere region, where spicules appear and stellar flares begin. This is surrounded by a transition region, where the temperature rapidly increases within a distance of only 100 km. Beyond this is the corona, a volume of super-heated plasma that can extend outward to several million kilometers.[96] The existence of a corona appears to be dependent on a convective zone in the outer layers of the star.[95] Despite its high temperature, the corona emits very little light. The corona region of the Sun is normally only visible during a solar eclipse.

From the corona, a stellar wind of plasma particles expands outward from the star, propagating until it interacts with the interstellar medium. For the Sun, the influence of its solar wind extends throughout the bubble-shaped region of the heliosphere.[97]

Nuclear fusion reaction pathways

Overview of the proton-proton chain
The carbon-nitrogen-oxygen cycle

A variety of different nuclear fusion reactions take place inside the cores of stars, depending upon their mass and composition, as part of stellar nucleosynthesis. The net mass of the fused atomic nuclei is smaller than the sum of the constituents. This lost mass is converted into energy, according to the mass-energy equivalence relationship E = mc².[23]

The hydrogen fusion process is temperature-sensitive, so a moderate increase in the core temperature will result in a significant increase in the fusion rate. As a result the core temperature of main sequence stars only varies from 4 million K for a small M-class star to 40 million K for a massive O-class star.[72]

In the Sun, with a 10 million K core, hydrogen fuses to form helium in the proton-proton chain reaction:[98]

41H → 22H + 2e+ + 2νe (4.0 MeV + 1.0 MeV)
21H + 22H → 23He + 2γ (5.5 MeV)
23He → 4He + 21H (12.9 MeV)

These reactions result in the overall reaction:

41H → 4He + 2e+ + 2γ + 2νe (26.7 MeV)

where e+ is a positron, γ is a gamma ray photon, νe is a neutrino, and H and He are isotopes of hydrogen and helium, respectively. The energy released by this reaction is in millions of electron volts, which is actually only a tiny amount of energy. However enormous numbers of these reactions occur constantly, producing all the energy necessary to sustain the star's radiation output.

Minimum stellar mass required for fusion
Element Solar
Hydrogen 0.01
Helium 0.4
Carbon 4
Neon 8

In more massive stars, helium is produced in a cycle of reactions catalyzed by carbon—the carbon-nitrogen-oxygen cycle.[98]

In evolved stars with cores at 100 million K and masses between 0.5 and 10 solar masses, helium can be transformed into carbon in the triple-alpha process that uses the intermediate element beryllium:[98]

4He + 4He + 92 keV → 8*Be
4He + 8*Be + 67 keV → 12*C
12*C → 12C + γ + 7.4 MeV

For an overall reaction of:

34He → 12C + γ + 7.2 MeV

In massive stars, heavier elements can also be burned in a contracting core through the neon burning process and oxygen burning process. The final stage in the stellar nucleosynthesis process is the silicon burning process that results in the production of the stable isotope iron-56. Fusion can not proceed any further except through an endothermic process, and so further energy can only be produced through gravitational collapse.[98]

The example below shows the amount of time required for a star of 20 solar masses to consume all of its nuclear fuel. As an O-class main sequence star, it would be 8 times the solar radius and 62,000 times the Sun's luminosity.[99]

(million kelvins)
Burn duration
(τ in years)
H 37 0.0045 8.1 million
He 188 0.97 1.2 million
C 870 170 976
Ne 1,570 3,100 0.6
O 1,980 5,550 1.25
S/Si 3,340 33,400 0.0315[100]


  1. 1.0 1.1 Icko Iben, Jr., Single and binary star evolution. Astrophysical Journal Supplement Series 76 (1991):55–114. Retrieved April 16, 2018.
  2. George Forbes, History of Astronomy. (London, UK: Watts & Co., 1909) Retrieved April 16, 2018.
  3. Claus Tøndering, Other ancient calendars. WebExhibits. Retrieved April 16, 2018.
  4. Ove von Spaeth, Dating the Oldest Egyptian Star Map. Centaurus International Magazine of the History of Mathematics, Science and Technology. 42(3) (2000):159–179. Retrieved April 16, 2018.
  5. D.H. Clark and F.R. Stephenson, "The Historical Supernovae". Supernovae: A survey of current research; Proceedings of the Advanced Study Institute. (Cambridge, UK: Dordrecht, D. Reidel Publishing Co., 1981, ISBN 978-9027714428), 355–370. Retrieved April 16, 2018.
  6. 6.0 6.1 Stephen A. Drake, A Brief History of High-Energy (X-ray & Gamma-Ray) Astronomy. NASA HEASARC, 2006. Retrieved April 16, 2018.
  7. Michael Hoskin, The Value of Archives in Writing the History of Astronomy. Space Telescope Science Institute, 1998. Retrieved April 16, 2018.
  8. Richard A. Proctor, Are any of the nebulæ star-systems? Nature 1 (1870):331–333. Retrieved April 16, 2018.
  9. Robert G. Aitken, The Binary Stars reprint ed. (New York, NY: Dover Publications Inc., 1964).
  10. A.A. Michelson, and F.G. Pease, Measurement of the diameter of Alpha Orionis with the interferometer. Astrophysical Journal 53 (1921):249–259. Retrieved April 18, 2018.
  11. 11.0 11.1 11.2 Albrecht Unsöld and Bodo Baschek, The New Cosmos: An Introduction to Astronomy and Astrophysics (New York, NY: Springer-Verlag, 2005, ISBN 978-3540678779).
  12. Paolo Battinelli, Serge Demers, and Bruno Letarte, Carbon Star Survey in the Local Group. V. The Outer Disk of M31. The Astronomical Journal. 125(3) (2003):1298–1308. Retrieved April 18, 2018.
  13. The Millennium Star Atlas. ESA. Retrieved April 18, 2018.
  14. Ray Villard, and Wendy L. Freedman, Hubble Space Telescope Measures Precise Distance to the Most Remote Galaxy Yet. Hubble Site, October 26, 1994. Retrieved April 18, 2018.
  15. Hubble Completes Eight-Year Effort to Measure Expanding Universe. Hubble Site, May 25, 1999. Retrieved April 18, 2018.
  16. UBC Prof, alumnus discover most distant star clusters: a billion light-years away. UBC Public Affairs, January 8, 2007. Retrieved April 18, 2018.
  17. Doyle Rice, Far out: Astronomers discover most distant star ever seen USA Today, April 3, 2018. Retrieved April 18, 2018.
  18. 18.0 18.1 Leslie S. Coleman, Myths, Legends and Lore. Frosty Drew Observatory. Retrieved April 18, 2018.
  19. 19.0 19.1 Naming the Stars. Royal Museums Greenwich. Retrieved April 18, 2018.
  20. Cecil Adams, Can you pay $35 to get a star named after you? The Straight Dope, April 1, 1988. Retrieved April 18, 2018.
  21. 21.0 21.1 I.J. Sackmann, and A.I. Boothroyd, Our Sun. V. A Bright Young Sun Consistent with Helioseismology and Warm Temperatures on Ancient Earth and Mars. The Astrophysical Journal 583(2) (2003):1024–1039. Retrieved April 19, 2018.
  22. S.C. Tripathy, and H.M. Antia, Influence of surface layers on the seismic estimate of the solar radius. Solar Physics. 186(1/2) (1999):1–11. Retrieved April 19, 2018.
  23. 23.0 23.1 John N. Bahcall, How the Sun Shines. Nobel Foundation, 2000. Retrieved April 19, 2018.
  24. 24.0 24.1 24.2 24.3 Michael Richmond, Late stages of evolution for low-mass stars. Rochester Institute of Technology. Retrieved April 19, 2018.
  25. P.R. Woodward, Theoretical models of star formation. Annual review of astronomy and astrophysics. 16 (1978):555–584. Retrieved April 19, 2018.
  26. Courtney Seligman, Slow Contraction of Protostellar Cloud. Retrieved April 19, 2018.
  27. J. Bally, J. Morse, and B. Reipurth, "The Birth of Stars: Herbig-Haro Jets, Accretion and Proto-Planetary Disks". In Benvenuti, Piero, F.D. Macchetto, and Ethan J. Schreier (eds.), Science with the Hubble Space Telescope - II. Proceedings of a workshop held in Paris, France, December 4–8, 1995. Baltimore, MD: Space Telescope Science Institute (STScI), 1996, 491. Retrieved April 19, 2018.
  28. J.G. Mengel, P. Demarque, A.V. Sweigart, and P.G. Gross, Stellar evolution from the zero-age main sequence. Astrophysical Journal Supplement Series 40 (1979):733–791. Retrieved April 19, 2018.
  29. 29.0 29.1 I.J. Sackmann, A.I. Boothroyd, and K.E. Kraemer, Our Sun. III. Present and Future. Astrophysical Journal. 418 (1993):457. Retrieved April 19, 2018.
  30. B.E. Wood, H.R. Müller, G.P. Zank, and J.L. Linsky, Measured Mass-Loss Rates of Solar-like Stars as a Function of Age and Activity. The Astrophysical Journal. 574(1) (2002):412–425. Retrieved April 19, 2018.
  31. C. de Loore, J.P. de Greve, and H.J.G.L.M. Lamers, Evolution of massive stars with mass loss by stellar wind. Astronomy and Astrophysics. 61(2) (1977):251–259. Retrieved April 19, 2018.
  32. Jason Palmer, Hope dims that Earth will survive Sun's death. NewScientis, February 22, 2008. Retrieved April 19, 2018.
  33. 33.0 33.1 Gary Hinshaw, The Life and Death of Stars. NASA WMAP Mission, 2006. Retrieved April 19, 2018.
  34. Icko Iben, Jr., Single and binary star evolution. Astrophysical Journal Supplement Series. 76 (1991):55–114. Retrieved April 19, 2018.
  35. Stellar Processes and Evolution ESA. Retrieved April 19, 2018.
  36. J. Liebert, White dwarf stars. Annual review of astronomy and astrophysics 18(2) (1980):363–398. Retrieved April 27, 2018.
  37. 37.0 37.1 37.2 Introduction to Supernova Remnants. Goddard Space Flight Center. Retrieved April 27, 2018.
  38. C.L. Fryer, Black-hole formation from stellar collapse. Classical and Quantum Gravity 20 (2003):S73–S80. Retrieved April 27, 2018.
  39. Victor G. Szebehely and Richard B. Curran, Stability of the Solar System and Its Minor Natural and Artificial Bodies (New York, NY: Springer, 1985, ISBN 9027720460).
  40. Most Milky Way Stars Are Single. Harvard-Smithsonian Center for Astrophysics, January 29, 2006.
  41. A universe of two trillion galaxies Royal Astronomical Society, October 24, 2016. Retrieved April 27, 2018.
  42. Hubble Finds Intergalactic Stars. Hubble News Desk, January 14, 1997. Retrieved April 27, 2018.
  43. Andrew Craig, Astronomers count the stars. BBC News, July 22, 2003. Retrieved April 27, 2018.
  44. 3.99 × 1013 km / (3 × 104 km/h × 24 × 365.25) = 1.5 × 105 years.
  45. J. Holmberg and C. Flynn, The local density of matter mapped by Hipparcos. Monthly Notices of the Royal Astronomical Society. 313(2) (2000):209–216. Retrieved April 27, 2018.
  46. Astronomers: Star collisions are rampant, catastrophic. CNN News, June 2, 2000. Retrieved April 27, 2018.
  47. J.C. Lombardi, Jr., J.B. Warren, F.A. Rasio, A. Sills, and A.R. Warren, Stellar Collisions and the Interior Structure of Blue Stragglers. The Astrophysical Journal 568 (2002):939–953. Retrieved April 27, 2018.
  48. A. Frebel, J.E. Norris, N. Christlieb, C. Thom, T.C. Beers, and J. Rhee. 2007. Nearby Star Is A Galactic Fossil Science Daily, May 11, 2007. Retrieved April 27, 2018.
  49. D. A. Fischer, and J. Valenti The Planet-Metallicity Correlation. The Astrophysical Journal. 622(2) (2005):1102–1117. Retrieved April 27, 2018.
  50. Swedish Research Council, Signatures Of The First Stars Science Daily, April 17, 2005. Retrieved April 27, 2018.
  51. S. Feltzing and G. Gonzalez, The nature of super-metal-rich stars: Detailed abundance analysis of 8 super-metal-rich star candidates. Astronomy & Astrophysics. 367 (2000):253–265. Retrieved April 27, 2018.
  52. David F. Gray, The Observation and Analysis of Stellar Photospheres (Cambridge, UK: Cambridge University Press, 1992, ISBN 0521408687).
  53. The Biggest Star in the Sky. ESO, March 11, 1997. Retrieved April 28, 2018.
  54. S. Ragland, T. Chandrasekhar, and N.M. Ashok, Angular Diameter of Carbon Star Tx-Piscium from Lunar Occultation Observations in the Near Infrared. Journal of Astrophysics and Astronomy. 16 (1995):332. Retrieved April 28, 2018.
  55. Kate Davis, 2000. Orionis (Betelgeuse) AAVSO, April 13, 2010.
  56. Hipparcos: High Proper Motion Stars. ESA. Retrieved April 28, 2018.
  57. Hugh M. Johnson, The Kinematics and Evolution of Population I Stars. Publications of the Astronomical Society of the Pacific 69(406) (1957):54. Retrieved April 28, 2018.
  58. Christopher Wanjek, Monster Stellar Flare Seen by NASA Scientists Dwarfs All Others NASA, November 6, 2006. Retrieved December 12, 2008.
  59. Svetlana V. Berdyugina, Starspots: A Key to the Stellar Dynamo. Living Reviews, December, 2005. Retrieved April 28, 2018.
  60. Nathan Smith,The Behemoth Eta Carinae: A Repeat Offender Mercury Magazine 27 (1998):20. Retrieved April 30, 2018.
  61. NASA's Hubble Weighs in on the Heaviest Stars in the Galaxy. NASA News, March 9, 2005. Retrieved April 30, 2018.
  62. Ferreting Out The First Stars. Harvard-Smithsonian Center for Astrophysics, September 21, 2005.
  63. Weighing the Smallest Stars ESO, January 19, 2005. Retrieved April 30, 2018.
  64. 64.0 64.1 David Shiga, Mass cut-off between stars and brown dwarfs revealed New Scientist, August 17, 2006. Retrieved April 30, 2018.
  65. Elli Leadbeater, Hubble glimpses faintest stars BBC News, August 17, 2006. Retrieved April 30, 2018.
  66. Flattest Star Ever Seen ESO, June 11, 2003. Retrieved May 4, 2018.
  67. C. P. Johnstone, M. Güdel, I. Brott, and T. Lüftinger, Stellar winds on the main-sequence. Astronomy & Astrophysics 577 (May 2015). Retrieved May 4, 2018.
  68. Massimo Villata, Angular momentum loss by a stellar wind and rotational velocities of white dwarfs. Monthly Notices of the Royal Astronomical Society. 257(3) (1992):450–454. Retrieved May 4, 2018.
  69. Mathias Jäger, Powerful processes at work: The Crab Nebula as never seen before ESA/Hubble, July 7, 2016. Retrieved May 4, 2018.
  70. Nick Strobel, Properties of Stars: Color and Temperature. Astronomy Notes, June 7, 2010. Retrieved May 4, 2018.
  71. Courtney Seligman, Review of Heat Flow Inside Stars. Online Astronomy Text. Retrieved May 4, 2018.
  72. 72.0 72.1 Main Sequence Stars Australia Telescope National Facility. Retrieved May 5, 2018.
  73. Michael A. Zeilik and Stephan A. Gregory, Introductory Astronomy & Astrophysics (Fort Worth, TX: Saunders College Publishing, 1998, ISBN 0030062284), 321.
  74. John Roach, Astrophysicist Recognized for Discovery of Solar Wind. National Geographic News, 2003. Retrieved May 4, 2018.
  75. The Colour of Stars Australian Telescope Outreach and Education. Retrieved May 4, 2018.
  76. Astronomers Measure Mass of a Single Star—First Since the Sun. Hubble News Desk, July 15, 2004. Retrieved May 4, 2018.
  77. D.R. Garnett, H.A. Kobulnicky, "Distance Dependence in the Solar Neighborhood Age-Metallicity Relation" The Astrophysical Journal 532 (2000):1192–1196.
  78. Rapidly Spinning Star Vega has Cool Dark Equator National Optical Astronomy Observatory, January 10, 2006. Retrieved May 4, 2018.
  79. Svetlana V. Berdyugina, Starspots: A Key to the Stellar Dynamo Living Reviews in Solar Physics 2(8) (December 2005). Retrieved May 4, 2018.
  80. A. Manduca, R.A. Bell, and B. Gustafsson, Limb darkening coefficients for late-type giant model atmospheres Astronomy and Astrophysics 61(6) (1977):809–813. Retrieved May 4, 2018.
  81. P.F. Chugainov, On the Cause of Periodic Light Variations of Some Red Dwarf Stars. Information Bulletin on Variable Stars 520 (1971):1–3. Retrieved May 4, 2018.
  82. Magnitude. National Solar Observatory—Sacramento Peak. Retrieved May 5, 2018.
  83. 83.0 83.1 Luminosity of Stars. Australian Telescope Outreach and Education. Retrieved May 5, 2018.
  84. Faintest Stars in Globular Cluster NGC 6397. HubbleSite, August 17, 2006. Retrieved May 5, 2018.
  85. Gene Smith, Stellar Spectra. University of California, San Diego, April 16, 1999. Retrieved May 5, 2018.
  86. A. Fowler, "The Draper Catalogue of Stellar Spectra." Nature, a Weekly Illustrated Journal of Science. 45 (1891-1892):427–8.
  87. Carlos Jaschek and Mercedes Jaschek, The Classification of Stars (Cambridge, UK: Cambridge University Press, 1990, ISBN 0521389968).
  88. 88.0 88.1 88.2 Alan M. MacRobert, The Spectral Types of Stars Sky and Telescope, August 1, 2006. Retrieved May 5, 2018.
  89. J. Liebert and E. Sion, The Spectroscopic Classification of White Dwarfs: Unique Requirements and Challenges The MK process at 50 years. A powerful tool for astrophysical insight. Astronomical Society of the Pacific Conference Series, Proceedings of a Workshop of the Vatican Observatory, held in Tucson, Arizona, September 1993. Retrieved May 5, 2018.
  90. 90.0 90.1 90.2 90.3 Types of Variables AAVSO, August 24, 2017. Retrieved May 5, 2018.
  91. Cataclysmic Variables NASA Goddard Space Flight Center, December 2010. Retrieved May 5, 2018.
  92. Carl J. Hansen, Steven D. Kawaler, and Virginia Trimble, Stellar Interiors (New York, NY: Springer, 2004, ISBN 0387200894).
  93. 93.0 93.1 93.2 Martin Schwarzschild, Structure and Evolution of the Stars (Princeton, NJ: Princeton University Press, 1958, ISBN 0691080445).
  94. Formation of the High Mass Elements. Retrieved May 5, 2018.
  95. 95.0 95.1 The Convection Zone. NorthWest Research Associates. Retrieved May 5, 2018.
  96. The Glory of a Nearby Star: Optical Light from a Hot Stellar Corona Detected with the VLT. ESO, August 1, 2001. Retrieved May 5, 2018.
  97. L.F. Burlaga, N.F. Ness, M.H. Acuña, R.P. Lepping, J. Connerney, E.C. Stone, and F.B. McDonald. "Crossing the Termination Shock into the Heliosheath: Magnetic Fields." Science 309(5743) (2005):2027–2029.
  98. 98.0 98.1 98.2 98.3 G. Wallerstein, I. Iben Jr., P. Parker, A.M. Boesgaard, G.M. Hale, A.E. Champagne, C.A. Barnes, F. KM-dppeler, V.V. Smith, R.D. Hoffman, F.X. Timmes, C. Sneden, R.N. Boyd, B.S. Meyer, and D.L. Lambert. 1999. Synthesis of the elements in stars: forty years of progress. Reviews of Modern Physics. 69(4):995–1084. Retrieved May 5, 2018.
  99. S.E. Woosley, A. Heger, and T.A. Weaver, The evolution and explosion of massive stars Reviews of Modern Physics. 74(4) (2002):1015–1071. Retrieved May 5, 2018.
  100. 11.5 days is 0.0315 years.

ISBN links support NWE through referral fees

  • Aitken, Robert G. The Binary Stars. reprint ed. New York, NY: Dover Publications Inc., 1964.
  • Gray, David F. The Observation and Analysis of Stellar Photospheres. Cambridge University Press, 1992. ISBN 978-0521408684
  • Gribbin, John, and Mary Gribbin. Stardust: Supernovae and Life—The Cosmic Connection. New Haven, CT: Yale University Press, 2001. ISBN 0300090978.
  • Hansen, Carl J., Steven D. Kawaler, and Virginia Trimble. Stellar Interiors. New York, NY: Springer, 2004. ISBN 0387200894.
  • Hawking, Stephen. A Brief History of Time. New York, NY: Bantam Books, 1988. ISBN 0553175211.
  • Jaschek, Carlos, and Mercedes Jaschek. The Classification of Stars. Cambridge University Press, 1990. ISBN 978-0521389969
  • Karttunen, H., et al, (eds.). Fundamental Astronomy, 4th ed. Helsinki, FI: Springer-Verlag, 2003. ISBN 3540001794.
  • Murdin, Paul (ed.). Encyclopedia of Astronomy and Astrophysics. Bristol, UK; Philadelphia, PA: Institute of Physics Publishing; London, UK; New York, NY; Tokyo, JP: Nature Publishing Group, 2001. ISBN 0333750888.
  • Pickover, Cliff. The Stars of Heaven. Oxford, UK: Oxford University Press, 2001. ISBN 0195148746.
  • Rees, Martin J., and Ray J. Stoneham (eds.). Supernovae: A Survey of Current Research: Proceedings of the NATO Advanced Study Institute held at Cambridge, U.K., June 29–July 10, 1981. Springer, 1982. ISBN 978-9027714428
  • Schwarzschild, Martin. Structure and Evolution of the Stars. Princeton, NJ: Princeton University Press, 1958. ISBN 0691080445.
  • Szebehely, Victor G., and Richard B. Curran. Stability of the Solar System and Its Minor Natural and Artificial Bodies. New York, NY: Springer, 1985. ISBN 9027720460.
  • Unsöld, Albrecht, and Bodo Baschek. The New Cosmos: An Introduction to Astronomy and Astrophysics. New York, NY: Springer-Verlag, 2005. ISBN 978-3540678779
  • Zeilik, Michael A. and Stephan A. Gregory. Introductory Astronomy & Astrophysics, 4th ed. Fort Worth, TX: Saunders College Publishing, 1998. ISBN 0030062284.

External links

All links retrieved February 9, 2023.


New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

The history of this article since it was imported to New World Encyclopedia:

Note: Some restrictions may apply to use of individual images which are separately licensed.