From New World Encyclopedia
Revision as of 17:47, 28 March 2024 by Rosie Tanabe (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
9 oxygenfluorineneon


periodic table
Name, Symbol, Number fluorine, F, 9
Chemical series halogens
Group, Period, Block 17, 2, p
Appearance Yellowish brown gas
Atomic mass 18.9984032(5) g/mol
Electron configuration 1s2 2s2 2p5
Electrons per shell 2, 7
Physical properties
Phase gas
Density (0 °C, 101.325 kPa)
1.7 g/L
Melting point 53.53 K
(-219.62 °C, -363.32 °F)
Boiling point 85.03 K
(-188.12 °C, -306.62 °F)
Critical point 144.13 K, 5.172 MPa
Heat of fusion (F2) 0.510 kJ/mol
Heat of vaporization (F2) 6.62 kJ/mol
Heat capacity (25 °C) (F2)
31.304 J/(mol·K)
Vapor pressure
P/Pa 1 10 100 1 k 10 k 100 k
at T/K 38 44 50 58 69 85
Atomic properties
Crystal structure cubic
Oxidation states −1
(strongly acidic oxide)
Electronegativity 3.98 (Pauling scale)
Ionization energies
1st: 1681.0 kJ/mol
2nd: 3374.2 kJ/mol
3rd: 6050.4 kJ/mol
Atomic radius 50 pm
Atomic radius (calc.) 42 pm
Covalent radius 71 pm
Van der Waals radius 147 pm
Magnetic ordering nonmagnetic
Thermal conductivity (300 K) 27.7 mW/(m·K)
CAS registry number 7782-41-4
Notable isotopes
Main article: Isotopes of fluorine
iso NA half-life DM DE (MeV) DP
19F 100% F is stable with 10 neutrons

Fluorine (chemical symbol F, atomic number 9) is a nonmetal that belongs to a group of chemical elements known as halogens. Chemically, it is the most reactive and electronegative of all elements. At ordinary temperatures and pressures, pure fluorine is a poisonous gas, pale yellow in color, with the chemical formula F2. Like other halogens, molecular fluorine is extremely dangerous, causing severe chemical burns on contact with skin.

Fluorine and its compounds are useful for a wide range of applications, including the manufacture of pharmaceuticals, agrochemicals, lubricants, and textiles. Hydrofluoric acid is used to etch glass, and fluorine is used for plasma etching in the manufacture of semiconductors and other products. Low concentrations of fluoride ions in toothpaste and drinking water can help prevent dental cavities, while higher concentrations of fluoride are used in some insecticides. Many important general anesthetics are derivatives of fluorohydrocarbons. The isotope 18F is a source of positrons for medical imaging by the technique called PET (positron emission tomography), and uranium hexafluoride is used to separate uranium isotopes and produce enriched uranium for nuclear power plants.

Discovery and isolation

The name fluorine is derived from the Latin term fluere, meaning "to flow." Minerals containing compounds of fluorine were known for many years before isolation of the element fluorine. For example, the mineral fluorspar (or fluorite), consisting of calcium fluoride, was described in 1530 by Georgius Agricola.[1] He noted that it was useful as a flux—a substance that helps lower the melting temperature of a metal or ore and aids in purification of the desired metal.

In 1670, the glassworker Heinrich Schwanhard found that glass was etched when exposed to acid-treated fluorspar. Karl Scheele and many later researchers—including Humphry Davy, Joseph Louis Gay-Lussac, Antoine Lavoisier, and Louis Thenard—experimented with hydrofluoric acid (HF), which was readily obtained by treating calcium fluoride (fluorspar) with concentrated sulfuric acid.

It was eventually realized that hydrofluoric acid contained a previously unknown element. This element, however, was not isolated for many years, because of its extreme reactivity. Not only is it difficult to separate from its compounds, but it then immediately attacks the remaining materials of the compound. The derivation of elemental fluorine from hydrofluoric acid is exceptionally dangerous, and early attempts to do so blinded and killed several scientists. These men came to be known as the "fluorine martyrs."

Finally, French chemist Henri Moissan succeeded in isolating fluorine in 1886, through the electrolysis of a mixture of molten potassium fluoride and hydrofluoric acid. For that success, Moissan was awarded the 1906 Nobel Prize in Chemistry. His electrolytic approach continues to be used today for the industrial preparation of fluorine.

The first large-scale production of fluorine was undertaken during World War II, as a step in the making of atomic bombs in the Manhattan project. The fluorine was used to produce uranium hexafluoride (UF6), which in turn was used to separate two uranium isotopes, 235U and 238U, from each other. Today, gaseous UF6 is used to produce enriched uranium for nuclear power applications.

Notable characteristics

In the periodic table, fluorine is located at the top of group 17 (former group 7A), which is the halogen family. Other halogens are chlorine, bromine, iodine, and astatine. In addition, it is situated in period 2, between oxygen and neon.

Pure fluorine (chemical formula F2) is a corrosive gas with a characteristic pungent odor that is detectable in concentrations as low as 20 nanoliters per liter of gas volume. As the most reactive and electronegative of all elements, it readily forms compounds with most other elements. It is far too reactive to be found in elemental form and has such an affinity for most elements, including silicon, that it cannot be prepared or stored in glass vessels. In moist air, it reacts with water to form the equally dangerous hydrofluoric acid.

Fluorine reacts explosively with hydrogen even under cool conditions in the dark. It reacts violently with water to generate hydrofluoric acid and oxygen gas. Various materials—including finely divided metals and glass—burn with a bright flame in a jet of fluorine gas. Moreover, fluorine forms compounds with the noble gases krypton, xenon, and radon. It does not, however, react directly with nitrogen or oxygen.

Notwithstanding its extreme reactivity, methods for the safe handling and transport of fluorine are now available. The element can be stored in containers of steel or Monel metal (a nickel-rich alloy of metals), as these materials form surface fluorides that resist further reaction.

Fluorides are compounds in which fluorine occurs in the form of the negatively charged fluoride ion (F), combined with some positively charged counterpart. Compounds of fluorine with metals are among the most stable of salts. When dissolved in water, these salts release fluoride ions. Other forms of fluorine are fluoro-complexes, such as [FeF4], and H2F+.


There are many isotopes of fluorine, ranging from 14F to 31F. Only one of these isotopes, 19F, which contains 10 neutrons, is stable. The radioactive isotope 18F is a valuable source of positrons.

Biological effects

Bones and teeth contain most of the body's fluorine, in the form of fluoride ions. Fluoridation of drinking water (at levels below one part per million) significantly reduces the incidence of dental caries—a viewpoint endorsed by the Food and Nutrition Board of the National Academy of Sciences-National Research Council (NAS/NRC). On the other hand, excess accumulation of fluoride can lead to fluorosis, manifested in the mottling of teeth. This effect is commonly observed in communities with drinking water containing fluoride at concentrations exceeding ten parts per million.

Both elemental fluorine and fluoride salts are toxic and must be handled with great care. Contact with the skin or eyes should be strictly avoided. Contact with exposed skin produces hydrofluoric acid, which rapidly migrates through the skin and flesh and reacts with calcium in the bones, permanently damaging the bones.


A wide range of organic and inorganic compounds contain fluorine. In the case of organic compounds, chemists can replace hydrogen atoms with fluorine atoms, thus creating many new products. Being a highly reactive element, fluorine forms compounds with several noble gases, as demonstrated by Neil Bartlett who synthesized xenon hexafluoroplatinate (XePtF6) in 1962. Fluorides of krypton and radon have also been prepared. Another compound is argon fluorohydride, but it is stable only at extremely low temperatures.

Crystals of the mineral fluorite (calcium fluoride, CaF2)

The following is a list of inorganic compounds of fluorine.

  • Ammonium fluoride (NH4F)
  • Antimony pentafluoride (SbF5)
  • Boron trifluoride (BF3)
  • Bromine pentafluoride (BrF5)
  • Bromine trifluoride (BrF3)
  • Cesium fluoride (CsF)
  • Calcium fluoride (CaF2)
  • Chlorine pentafluoride (ClF5)
  • Fluorosulfuric acid (FSO3H)
  • Hydrofluoric acid (HF)
  • Iodine pentafluoride (IF5)
  • Iodine heptafluoride (IF7)
  • Lithium fluoride (LiF)
  • Nitrogen trifluoride (NF3)
  • Nitrosyl fluoride (NOF)
  • Nitryl fluoride (NO2F)
  • Phosphorus trifluoride (PF3)
  • Phosphorus pentafluoride (PF5)
  • Plutonium fluoride (PuF4)
  • Potassium fluoride (KF)
  • Radon difluoride (RnF2)
  • Silver(I) fluoride (AgF)
  • Silver(II) fluoride (AgF2)
  • Sodium fluoride (NaF)
  • Sulfur hexafluoride (SF6)
  • Rubidium fluoride (RbF)
  • Thionyl fluoride (SOF2)
  • Tungsten(VI) fluoride (WF6)
  • Uranium hexafluoride (UF6)
  • Xenon hexafluoroplatinate (XePtF6)
  • Xenon tetrafluoride (XeF4)


  • Fluorine in the atomic and molecular states is used for plasma etching in the manufacture of semiconductors, flat panel displays, and MEMS (microelectromechanical systems).
  • Hydrofluoric acid is used to etch glass in light bulbs and other products.
  • Along with some of its compounds, fluorine is useful for the manufacture of pharmaceuticals, agrochemicals, lubricants, and textiles.
  • Fluorine is used indirectly in the production of low-friction plastics such as Teflon.
  • Fluorine has been used in producing halogenated alkanes (halons), which in turn have been used extensively in air conditioning and refrigeration. Chlorofluorocarbons (CFCs) have been banned for these applications because they contribute to expansion of the ozone hole in the upper atmosphere.
  • Sulfur hexafluoride is an extremely inert, nontoxic gas, and a member of a class of compounds that are potent greenhouse gases.
  • Many important agents for general anesthesia (such as sevoflurane, desflurane, and isoflurane) are derivatives of fluorohydrocarbons.
  • Sodium hexafluoroaluminate (cryolite) is used in the electrolysis of aluminum.
  • Compounds of fluorine, including sodium fluoride, are used in toothpaste to prevent dental cavities. These compounds are also added to municipal water supplies, a process called water fluoridation, but health concerns have led to controversy over this practice.
  • At much higher concentrations, sodium fluoride has been used as an insecticide, especially against cockroaches.
  • Fluorides have been used in the past to reduce the melting temperatures of metals and ores, and to help them flow.
  • 18F, a radioactive isotope of fluorine with a half-life of 110 minutes, emits positrons and is often used in medical imaging by a technique known as positron emission tomography.
  • Fluorine is used for the production of uranium hexafluoride, which in turn is used to separate uranium isotopes, as noted above.

See also


  1. Peter Meiers, “Discovery of fluorine,” Fluoride-History.de. Retrieved September 7, 2007.

ISBN links support NWE through referral fees

External links

All links retrieved March 28, 2024.


New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

The history of this article since it was imported to New World Encyclopedia:

Note: Some restrictions may apply to use of individual images which are separately licensed.