Nanotechnology

From New World Encyclopedia
Revision as of 06:57, 21 February 2006 by Dinshaw Dadachanji (talk | contribs) (added credit and category tags)
Previous (Nanoparticle)
Next (Napalm)
A mite next to a gear set produced using MEMS, the precursor to nanotechnology. Courtesy Sandia National Laboratories, SUMMiTTM Technologies, www.mems.sandia.gov

Nanotechnology comprises technological developments on the nanometer scale, usually 0.1 to 100 nm. (One nanometer equals one thousandth of a micrometre or one millionth of a millimetre.) The term has sometimes been applied to microscopic technology. This article discusses nanotechnology, nanoscience, and molecular nanotechnology.

Intro

Definition

Nanotechnology is any technology which exploits phenomena and structures that can only occur at the nanometer scale, which is the scale of several atoms and small molecules. The United States' National Nanotechnology Initiative website defines it as follows: "Nanotechnology is the understanding and control of matter at dimensions of roughly 1 to 100 nanometers, where unique phenomena enable novel applications." Such phenomena include quantum confinement—which can result in different electromagnetic and optical properties of a material between nanoparticles and the bulk material; the Gibbs-Thomson effect—which is the lowering of the melting point of a material when it is nanometers in size; and such structures including carbon nanotubes. Nanoscience and nanotechnology are an extension of the field of materials science, and materials science departments at universities around the world in conjunction with physics, mechanical engineering, bioengineering, and chemical engineering departments are leading the breakthroughs in nanotechnology.

The related term nanoscience is used to describe the interdisciplinary fields of science devoted to the study of nanoscale phenomena employed in nanotechnology. This is the world of atoms, molecules, macromolecules, quantum dots, and macromolecular assemblies, and is dominated by surface effects such as Van der Waals force attraction, hydrogen bonding, electronic charge, ionic bonding, covalent bonding, hydrophobicity, hydrophilicity, and quantum mechanical tunneling, to the virtual exclusion of macro-scale effects such as turbulence and inertia. For example, the vastly increased ratio of surface area to volume opens new possibilities in surface-based science, such as catalysis.

History of Use

The first mention of some of the distinguishing concepts in nanotechnology (but predating use of that name) was in "There's Plenty of Room at the Bottom", a talk given by physicist Richard Feynman at an American Physical Society meeting at Caltech on December 29, 1959. Feynman described a process by which the ability to manipulate individual atoms and molecules might be developed, using one set of precise tools to build and operate another proportionally smaller set, so on down to the needed scale. In the course of this, he noted, scaling issues would arise from the changing magnitude of various physical phenomena: gravity would become less important, surface tension and Van der Waals attraction would become more important, etc. This basic idea appears feasible, and exponential assembly enhances it with parallelism to produce a useful quantity of end products.

The term "nanotechnology" was defined by Tokyo Science University professor Norio Taniguchi in a 1974 paper (N. Taniguchi, "On the Basic Concept of 'Nano-Technology'," Proc. Intl. Conf. Prod. Eng. Tokyo, Part II, Japan Society of Precision Engineering, 1974.) as follows: "'Nano-technology' mainly consists of the processing of, separation, consolidation, and deformation of materials by one atom or one molecule." In the 1980s the basic idea of this definition was explored in much more depth by Dr. Eric Drexler, who promoted the technological significance of nano-scale phenomena and devices through speeches and the books Engines of Creation: The Coming Era of Nanotechnology and Nanosystems: Molecular Machinery, Manufacturing, and Computation, (ISBN 0-471-57518-6), and so the term acquired its current sense.

More broadly, nanotechnology includes the many techniques used to create structures at a size scale below 100 nm, including those used for fabrication of nanowires, those used in semiconductor fabrication such as deep ultraviolet lithography, electron beam lithography, focused ion beam machining,Nanoimprint Lithography atomic layer deposition, and molecular vapor deposition, and further including molecular self-assembly techniques such as those employing di-block copolymers. It should be noted, however, that all of these techniques preceeded the nanotech era, and are extensions in the development of scientific advancements rather than techniques which were devised with the sole purpose of creating nanotechnology or which were results of nanotechnology research.

The term nanotechnology is sometimes conflated with the more specific molecular nanotechnology (also known as "MNT"), a proposed form of advanced nanotechnology based on productive nanosystems. Molecular nanotechnology would fabricate precise structures using mechanosynthesis to perform molecular manufacturing. Molecular nanotechnology, though not yet extant, is expected to have a great impact on society if realized. In August 2005, a task force consisting of 50+ international experts from various fields was organized by the Center for Responsible Nanotechnology to study the societal implications of molecular nanotechnology.

Technologies currently branded with the term 'nano' are little related to and fall far short of the most ambitious and transformative technological goals of the sort in molecular manufacturing proposals, but the term still connotes such ideas. Thus there may be a danger that a nano bubble will form from the use of the term by scientists and entrepreneurs to garner funding, regardless of (and perhaps despite a lack of) interest in the transformative possibilities of more ambitious and far-sighted work. The diversion of support based on the promises of proposals like molecular manufacturing to more mundane projects also risks creating a perhaps unjustifiedly cynical impression of the most ambitious goals: an investor intrigued by molecular manufacturing who invests in 'nano' only to find typical materials science advances result might conclude that the whole idea is hype, unable to appreciate the bait-and-switch made possible by the vagueness of the term. On the other hand, some have argued that the publicity and competence in related areas generated by supporting such 'soft nano' projects is valuable, even if indirect, progress towards nanotechnology's most ambitious goals.

New materials, devices, technologies

Template:Cleanup-date As manufacturing technology becomes more sophisticated it naturally enters the realm of what is arbitrarily labeled nanotechnology. Nanotechnology is based on the fact that the properties of materials become markedly different when their size approaches that of a few hundreds or tens of atoms. Nanoparticles (nanometer sized clusters of atoms), for example, have proved useful in catalysis. A material that is catalytically inactive on the macroscale can behave as a very efficient catalyst when in the form of nanoparticles. For this and other reasons, if nanobots are ever created they will not simply be scaled down versions of contemporary robots (an image popularised by Eric Drexler). The different physics at these scales means that man-made nanodevices will probably bear much stronger resemblance to nature's nanodevices: made from proteins, DNA and membranes, much like viruses. This idea is explored by Richard A. L. Jones in his book Soft Machines: Nanotechnology and Life (ISBN 0-19-852855-8).

One fundamental characteristic of nanotechnology is that nanodevices self-assemble. That is, they build themselves from the bottom up. Scanning probe microscopy is an important technique both for characterization and synthesis of nanomaterials. Atomic force microscopes and scanning tunneling microscopes can be used to look at surfaces and to move atoms around. By designing different tips for these microscopes, they can be used for carving out structures on surfaces and to help guide self-assembling structures. Atoms can be moved around on a surface with scanning probe microscopy techniques, but it is cumbersome, expensive and very time-consuming, and for these reasons it is quite simply not feasible to construct nanoscaled devices atom by atom. You don't want to assemble a billion transistors into a microchip by taking an hour to place each transistor, but these techniques can be used for things like helping to guide self-assembling systems.

One of the problems facing nanotechnology is how to assemble atoms and molecules into smart materials and working devices. Supramolecular chemistry is here a very important tool. Supramolecular chemistry is the chemistry beyond the molecule, and molecules are being designed to self-assemble into larger structures. In this case, biology is a place to find inspiration: cells and their pieces are made from self-assembling biopolymers such as proteins and protein complexes. One of the things being explored is synthesis of organic molecules by adding them to the ends of complementary DNA strands such as ----A and ----B, with molecules A and B attached to the end; when these are put together, the complementary DNA strands hydrogen bonds into a double helix, ====AB, and the DNA molecule can be removed to isolate the product AB.

Natural or man-made particles or artifacts often have qualities and capabilities quite different from their macroscopic counterparts. Gold, for example, which is chemically inert at normal scales, can serve as a potent chemical catalyst at nanoscales.

"Nanosize" powder particles (a few nanometres in diameter, also called nano-particles) are potentially important in ceramics, powder metallurgy, the achievement of uniform nanoporosity, and similar applications. The strong tendency of small particles to form clumps ("agglomerates") is a serious technological problem that impedes such applications. However, a few dispersants such as ammonium citrate (aqueous) and imidazoline or oleyl alcohol (nonaqueous) are promising additives for deagglomeration. (Those materials are discussed in "Organic Additives And Ceramic Processing," by D. J. Shanefield, Kluwer Academic Publ., Boston.)

In October 2004, researchers at the University of Manchester succeeded in forming a small piece of material only 1 atom thick called graphene.[1] Robert Freitas has suggested that graphene might be used as a deposition surface for a diamondoid mechanosynthesis tool.[2]

As of August 23 2004, Stanford University has been able to construct a transistor from single-walled carbon nanotubes and organic molecules. These single-walled carbon nanotubes are basically a rolled up sheet of carbon atoms. They have accomplished creating this transistor making it two nanometers wide and able to maintain current three nanometers in length. To create this transistor they cut metallic nanotubes in order to form electrodes, and afterwards placed one or two organic materials to form a semiconducting channel between the electrodes. It is projected that this new achievement will be available in different applications in two to five years.

News.com reported on March 1st 2005 that Intel is preparing to introduce processors with features measuring 65 nanometers. The company’s current engineers believe that 5 nanometer processes are actually proving themselves to be more and more feasible. The company showed pictures of these transistor prototypes measuring 65, 45, 32, and 22 nanometers. However, the company spoke about how their expectations for the future are for new processors featuring 15,10, 7, and 5 nanometers.

Currently the prototypes use CMOS (complementary metal-oxide semiconductors); however, according to Intel smaller scales will rely on quantum dots, polymer layers, and nanotube technology.

PhysOrg.com writes about the use of plasmons in the world. Plasmons are waves of electrons traveling along the surface of metals. They have the same frequency and electromagnetic field as light; however, the sub-wavelength size allows them to use less space. These plasmons act like light waves in glass on metal, allowing engineers to use any of the same tricks such as multiplexing, or sending multiple waves. With the use of plasmons information can be transferred through chips at an incredible speed; however, these plasmons do have drawbacks. For instance, the distance plasmons travel before dying out depends on the metal, and even currently they can travel several millimeters, while chips are typically about a centimeter across from each other. In addition, the best metal currently available for plasmons to travel farther is aluminum. However, most industries that manufacture chips use copper over aluminum since it is a better electrical conductor. Furthermore, the issue of heat will have to be looked upon. The use of plasmons will definitely generate heat but the amount is currently unknown.

The further developments in the field of nanotechnology focuses on the oscillation of a nanomachine for telecommunication. The article states that in Boston an antenna-like sliver of silicon one-tenth the width of a human hair oscillated in a lab in a Boston University basement. This team led by Professor Pritiraj Mohanty developed the sliver of silicon. Since the technology functions at the speeds of gigahertz this could help make communication devices smaller and exchange information at gigahertz speeds. This nanomachine is comprised of 50 billion atoms and is able to oscillate at 1.49 billion times per second. The antenna moves over a distance of one-tenth of a picometer.

Advanced nanotechnology

Advanced nanotechnology, sometimes called molecular manufacturing, is a term given to the concept of engineered nanosystems (nanoscale machines) operating on the molecular scale. By the countless examples found in biology it is currently known that billions of years of evolutionary feedback can produce sophisticated, stochastically optimized biological machines, and it is hoped that developments in nanotechnology will make possible their construction by some shorter means, perhaps using biomimetic principles. However, K Eric Drexler and other researchers have proposed that advanced nanotechnology, although perhaps initially implemented by biomimetic means, ultimately could be based on mechanical engineering principles.

Sandia National Labs currently produces "Self Assembling Nano Inks" which can be used in standard inkjet printers. As the inks dry they assemble into arrays, cavities, q-dots etc.

A company called nanoink builds a "rapid prototyping" nano structure fabication machine which picks up atom chains and deposits them in a precise manner per the build file.

Determining a set of pathways for the development of molecular nanotechnology is now an objective of a broadly based technology roadmap project [3] led by Battelle (the manager of several U.S. National Laboratories) and the Foresight Institute. That roadmap should be completed by late 2006. In August 2005, a task force consisting of 50+ international experts from various fields was organized by the Center for Responsible Nanotechnology to study the societal implications of advanced nanotechnology.

Interdisciplinary ensemble

A definitive feature of nanotechnology is that it constitutes an interdisciplinary ensemble of several fields of the natural sciences that are, in and of themselves, actually highly specialized. Thus, physics plays an important role—alone in the construction of the microscope used to investigate such phenomena but above all in the laws of quantum mechanics

Potential risks

Goo

An often cited worst-case for everyone scenario is "grey goo", a hypothetical substance into which the surface objects of the earth might be transformed by self-replicating nanobots running amok, a process which has been termed global ecophagy. Defenders point out that smaller objects are more susceptible to damage from radiation and heat (due to greater surface area-to-volume ratios): nanomachines would quickly fail when exposed to harsh climates. This argument depends on the speed of which such nanomachines might be able to reproduce.

Recently, new analysis has shown that this "grey goo" danger is less likely than originally thought. K. Eric Drexler considers an accidental "grey goo" scenario extremely unlikely and says so in later editions of Engines of Creation. The "grey goo" scenario begs the Tree Sap Answer: what chances exist that one's car could spontaneously mutate into a wild car, run off-road and live in the forest off tree sap? However, other long-term major risks to society and the environment have been identified.

A variant on this is "Green Goo", a scenario in which nanobiotechnology creates a self-replicating nano machine which consumes all organic particles, living or dead, creating a slime -like non-living organic mass.

Both of these would, however, be limited by the same mechanism limiting all life forms (who generally already behave this way): available energy.

Poison/Toxicity

For the near-term, critics of nanotechnology point to the potential toxicity of new classes of nanosubstances that could adversely affect the stability of cell membranes or disturb the immune system when inhaled or digested. Objective risk assessment can profit from the bulk of experience with long-known microscopic materials like carbon soot or asbestos fibres.

There is a possibility that nanoparticles in drinking water could be dangerous to humans and/or other animals. Colon cells exposed to nano titanium dioxide particles have been found to decay at a quicker than normal rate. Titanium dioxide nanoparticles are often used in sunscreens, as they make them transparent, compared to bigger titanium dioxide particles, which make the sunscreen appear white.

Weapons

The weaponization of nanotechnology is a potential application. While advanced nanomaterials obviously have applications for improving existing weapons and military hardware through novel properties (such as improved strength to weight ratios or modified reflectivity to EM radiation for stealth applications), and molecular electronics could be used to build ruggedized computer systems for missiles, there is no obvious way for nanotechnology in any of its practical forms nowadays and into the foreseeable future to be weaponized beyond what is already possible with other technologies such as genetic engineering. While conceivably we could design nanomachines which attacked biological systems or the components of vehicles (i.e. a nanomachine which consumed the rubber in tires would quickly disable many vehicles), such designs are a far off concept. In terms of efficacy, they might be compared to weapon concepts such as genetically engineered bacteria or viruses, which are similar in intended and practical function and still generally are unattractive tactical weapons, though their terrorism applications are clear.

Nanotechnology could be used to create highly undetectable or concealable surveillance devices - molecular sized microphones, cameras, and homing beacons are well within the realms of possibility. The societal impact of such devices would depend on many factors, including who has access to them, how well they work, and how they are used.


See also

  • List of nanotechnology topics

Prominent individuals in nanotechnology

  • Richard Feynman
  • Norio Taniguchi
  • K. Eric Drexler
  • Robert Freitas
  • Ralph Merkle
  • Sumio Iijima
  • Richard Smalley
  • Erwin Müller
  • Gerd Binnig
  • David Britz
  • Heinrich Rohrer
  • Raymond Kurzweil
  • Paul Alivisatos
  • Chris Phoenix
  • Mike Treder
  • Tim McKnight
  • Phaedon Avouris
  • James Fraser Stoddart
  • Richard Colton

External links

Articles

Journals and News

Laboratories

Nanotechnology and Society

Other

Scientists in the Field

Dr. David G. Grier, of New York University, has developed a method of rapidly modulating laser beams via a dynamic spatial light modulator (SLM) in the form of a phase only hologram. (http://www.physics.nyu.edu/grierlab/)robots

References
ISBN links support NWE through referral fees

  • Daniel J. Shanefield (1996). Organic Additives And Ceramic Processing. Kluwer Academic Publishers. ISBN 0792397657..
  • Hunt, Geoffrey & Mehta, Michael (eds) (2006). Nanotechnology: Risk Ethics, & Law. Earthscan, London. {{{ID}}}.


Major fields of Technology
Applied science
Artificial intelligence · Ceramic engineering · Computing technology · Electronics · Energy · Energy storage · Engineering physics · Environmental technology · Fisheries science · Materials science and engineering · Microtechnology · Nanotechnology · Nuclear technology · Optics · Zoography
Information
Communication · Graphics · Music technology · Speech recognition · Visual technology
Industry
Construction · Financial engineering · Manufacturing · Machinery · Mining · Business informatics
Military
Ammunition · Bombs · Guns · Military technology and equipment · Naval engineering
Domestic
Educational technology · Domestic appliances · Domestic technology · Food technology
Engineering
Aerospace · Agricultural · Architectural · Audio · Automotive · Biological · Biochemical · Biomedical · Broadcast · Building officials · Ceramic · Chemical · Civil · Computer · Construction · Cryogenic · Electrical · Electronic · Environmental · Food · Industrial · Materials · Mechanical · Mechatronics · Metallurgical · Mining · Naval · Network · Nuclear · Optical · Petroleum · Radio Frequency · Software · Structural · Systems · Technician · Textile · Tissue · Transport
Health and safety
Biomedical engineering · Bioinformatics · Biotechnology · Cheminformatics · Fire protection engineering · Health technologies · Nutrition · Pharmaceuticals · Safety engineering · Sanitary engineering
Transport
Aerospace · Aerospace engineering · Automotive engineering · Marine engineering · Motor vehicles · Space technology


ar:تقانة نانوية bn:ন্যানোপ্রযুক্তি cs:Nanotechnologie da:Nanoteknologi de:Nanotechnologie es:Nanotecnología fr:Nanotechnologie gl:Nanotecnoloxía ko:나노 과학 id:Nanoteknologi it:Nanotecnologia he:ננוטכנולוגיה lt:Nanotechnologijos nl:Nanotechnologie ja:ナノテクノロジー no:Nanoteknologi nn:Nanoteknologi pl:Nanotechnologia pt:Nanotecnologia ro:Nanotehnologie ru:Нанотехнология sl:Nanotehnologija su:Nanotéhnologi sv:Nanoteknik th:นาโนเทคโนโลยี vi:Công nghệ nano tr:Nanoteknoloji zh:纳米科技

Credits

New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

The history of this article since it was imported to New World Encyclopedia:

Note: Some restrictions may apply to use of individual images which are separately licensed.

Retrieved from https://www.newworldencyclopedia.org/p/index.php?title=Nanotechnology&oldid=25885

Content is available under Creative Commons Attribution/Share-Alike License; additional terms may apply. See Terms of Use for details.
Copyright Logo
Powered by MediaWiki