Plumbing

From New World Encyclopedia
A complex arrangement of rigid steel piping, stop valves regulate flow to various parts of the building.

Plumbing (from the Latin word plumbum, meaning "lead") is the skilled trade of working with pipes, tubing and plumbing fixtures for drinking water systems and the drainage of waste. A plumber is someone who installs or repairs piping systems, plumbing fixtures and equipment such as water heaters. The plumbing industry is a basic and substantial part of every developed economy due to the need for clean water, and proper collection and transport of wastes.[1]

Plumbing also refers to a system of pipes and fixtures installed in a building for the distribution of potable water and the removal of waterborne wastes. Plumbing is usually distinguished from water and sewage systems, in that a plumbing system serves one building, while water and sewage systems serve a group of buildings or a city.

History

Standardized earthenware plumbing pipes with broad flanges making use of asphalt for preventing leakages appeared in the urban settlements of the Indus Valley Civilization by 2700 B.C.E.[2] Plumbing originated during the ancient civilizations such as the Greek, Roman, Persian, Indian, and Chinese civilizations as they developed public baths and needed to provide potable water, and drainage of wastes. Improvement in plumbing systems was very slow, with virtually no progress made from the time of the Roman system of aqueducts and lead pipes until the 19th century. Eventually the development of separate, underground water and sewage systems eliminated open sewage ditches and cesspools.

Materials

Water systems of ancient times relied on gravity for the supply of water, using pipes or channels usually made of clay, lead or stone. Present-day water-supply systems use a network of high-pressure pumps, and pipes are now made of copper,[3] brass, plastic, steel, or other nontoxic material. Present-day drain and vent lines are made of plastic, steel, cast-iron, and lead. Lead is not used in modern water-supply piping due to its toxicity.[4][5]

The 'straight' sections of plumbing systems are of pipe or tube. A pipe is typically formed via casting or welding, where a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, where tubing is thinner-walled and requires special joining techniques such as 'brazing', 'compression fitting', 'crimping', or for plastics, 'solvent welding'.

Fittings and valves

Piping being placed for a sink

In addition to the straight pipe or tubing, many fittings are required in plumbing systems, such as valves, elbows, tees, and unions. The piping and plumbing fittings and valves articles discuss them further.

Fixtures

Plumbing fixtures are designed for the end-users. Some examples of fixtures include water closets (also known as toilets), urinals, bidets, showers, bathtubs, utility and kitchen sinks, drinking fountains, ice makers, humidifiers, air washers, fountains, and eye wash stations

Equipment

A plumber wrench for working on pipes and fittings

Plumbing equipment, not present in all systems, include, for example, water meters, pumps, expansion tanks, backflow preventers, filters, water softeners, water heaters, heat exchangers, gauges, and control systems.

Now there is equipment that is technologically advanced and helps plumbers fix problems without the usual hassles. For example, plumbers use video cameras for inspections of hidden leaks or problems, they use hydro jets, and high pressure hydraulic pumps connected to steel cables for trench-less sewer line replacement.

Systems

Copper piping system in a building with intumescent firestop being installed by an insulator, Vancouver, British Columbia, Canada.

The major categories of plumbing systems or subsystems are:

  • Potable cold and hot water supply
  • Traps, drains, and vents
  • Septic systems
  • Rainwater, surface, and subsurface water drainage
  • Fuel gas piping

For their environmental benefit and sizable energy savings hot water heat recycling units are growing in use throughout the residential building sectors. Further ecological concern has seen increasing interest in gray-water recovery and treatment systems.

Firestopping

Self-levelling silicone firestop installation in mechanical service penetration in 2 hour rated concrete floor.

Firestopping is required where mechanical penetrants traverse fire-resistance rated wall and floor assemblies, or membranes thereof. This work is usually done worldwide by the insulation trade and/or specialty firestop sub-contractors.

Regulation

Much of the plumbing work in populated areas (cities, towns, etc...) is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners. In the United Kingdom the plumbing trade still remains virtually ungoverned; there are no systems in place to monitor or control the activities of unqualified plumbers or those home owners who choose to undertake installation and maintenance works themselves, despite the health and safety issues which arise from such works when they are undertaken incorrectly - see Health Aspects of Plumbing (HAP) published jointly by the World Health Organization (WHO)[1] and the World Plumbing Council (WPC) [2]. WPC has subsequently appointed a representative to the World Health Organization to take forward various projects related to Health Aspects of Plumbing [3].

See also

  • Active fire protection
  • Firestop
  • Heat pipe
  • Hot water heat recycling
  • Passive fire protection
  • Plastic pipework
  • Water pipe
  • World Plumbing Council

Notes

  1. History Channel (Television network), Arts and Entertainment Network, and New Video Group. 1998. Plumbing: The Arteries of Civilization. Modern Marvels. New York: A & E Television Network.
  2. Teresi et al. 2002
  3. Copper Tube Handbook, the Copper Development Association, New York, USA, 2006
  4. Uniform Plumbing Code, IAPMO
  5. International Plumbing Code, ICC

References
ISBN links support NWE through referral fees

  • Cory, Steve. 2005. Plumbing 1-2-3: Expert Advice from The Home Depot. Des Moines, IA: Meredith Books. ISBN 978-0696222474.
  • Henkenius, Merle. 2006. Ultimate Guide to Plumbing: Complete Projects for the Home. Upper Saddle River, NJ: Creative Homeowner. ISBN 978-1580113113.
  • International Code Council. 2006. International Plumbing Code 2006. Country Club Hills, IL: International Code Council. ISBN 978-1580012591.
  • Teresi, Dick. 2002. Lost Discoveries: The Ancient Roots of Modern Science—From the Babylonians to the Maya. New York: Simon & Schuster. ISBN 0684837188.

External Resources

Credits

New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

The history of this article since it was imported to New World Encyclopedia:

Note: Some restrictions may apply to use of individual images which are separately licensed.