Electrical conductivity

Not to be confused with electrical conductance, a measure of an object's or circuit's ability to conduct an electric current between two points, which is dependent on the electrical conductivity and the geometric dimensions of the conducting object.

Electrical conductivity or specific conductivity is a measure of a material's ability to conduct an electric current. When an electrical potential difference is placed across a conductor, its movable charges flow, giving rise to an electric current. The conductivity σ is defined as the ratio of the current density $\mathbf {J}$ to the electric field strength $\mathbf {E}$:

$\mathbf {J} =\sigma \mathbf {E}$

It is also possible to have materials in which the conductivity is anisotropic, in which case σ is a 3×3 matrix (or more technically a rank-2 tensor) which is generally symmetric.

Conductivity is the reciprocal (inverse) of electrical resistivity and has the SI units of siemens per metre (S·m^-1) i.e. if the electrical conductance between opposite faces of a 1-metre cube of material is 1 Siemens then the material's electrical conductivity is 1 Siemens per metre. Electrical conductivity is commonly represented by the Greek letter σ, but κ or γ are also occasionally used.

An EC meter is normally used to measure conductivity in a solution.

Classification of materials by conductivity

• A conductor such as a metal has high conductivity.
• An insulator like glass or a vacuum has low conductivity.
• The conductivity of a semiconductor is generally intermediate, but varies widely under different conditions, such as exposure of the material to electric fields or specific frequencies of light, and, most important, with temperature and composition of the semiconductor material.

The degree of doping in solid state semiconductors makes a large difference in conductivity. More doping leads to higher conductivity. The conductivity of a solution of water is highly dependent on its concentration of dissolved salts and sometimes other chemical species which tend to ionize in the solution. Electrical conductivity of water samples is used as an indicator of how salt-free or impurity-free the sample is; the purer the water, the lower the conductivity.

Some electrical conductivities

	Electrical Conductivity (S·m-1)	Temperature(°C)	Notes
Silver	63.01 × 106	20	Highest electrical conductivity of any metal
Copper	59.6 × 106	20
Annealed Copper	58.0 × 106	20	Referred to as 100% IACS or International Annealed Copper Standard. The unit for expressing the conductivity of nonmagnetic materials by testing using the eddy-current method. Generally used for temper and alloy verification of Aluminium.
Gold	45.2 × 106	20	Gold is commonly used in electrical contacts
Aluminium	37.8 × 106	20
Seawater	5	23	Refer to http://www.kayelaby.npl.co.uk/general_physics/2_7/2_7_9.html for more detail as there are many variations and significant variables for seawater. 5(S·m-1) would be for an average salinity of 35 g/kg at about 23(°C) Copyright on the linked material can be found here http://www.kayelaby.npl.co.uk/copyright/ Maybe someone could contact NPL and ask if their information could be reproduced in a separate page here.
Drinking water	0.0005 to 0.05		This value range is typical of high quality drinking water and not an indicator of water quality
deionized water	5.5 × 10-6		changes to 1.2 × 10-4 in water with no gas present

Complex conductivity

To analyze the conductivity of materials exposed to alternating electric fields, it is necessary to treat conductivity as a complex number (or as a matrix of complex numbers, in the case of anisotropic materials mentioned above) called the admittivity. This method is used in applications such as electrical impedance tomography, a type of industrial and medical imaging. Admittivity is the sum of a real component called the conductivity and an imaginary component called the susceptivity. [1]

An alternative description of the response to alternating currents uses a real (but frequency-dependent) conductivity, along with a real permittivity. The larger the conductivity is, the more quickly the alternating-current signal is absorbed by the material (i.e., the more opaque the material is). For details, see Mathematical descriptions of opacity.

Temperature dependence

Electrical conductivity is strongly dependent on temperature. In metals, electrical conductivity decreases with increasing temperature, whereas in semiconductors, electrical conductivity increases with increasing temperature. Over a limited temperature range, the electrical conductivity can be approximated as being directly proportional to temperature. In order to compare electrical conductivity measurements at different temperatures, they need to be standardized to a common temperature. This dependence is often expressed as a slope in the conductivity-vs-temperature graph, and can be used:

$\sigma _{T'}={\sigma _{T} \over 1+\alpha (T-T')}$

where

σ_T′ is the electrical conductivity at a common temperature, T′

σ_T is the electrical conductivity at a measured temperature, T

α is the temperature compensation slope of the material,

T is the measured absolute temperature,

T′ is the common temperature.

The temperature compensation slope for most naturally occurring waters is about 2 %/°C, however it can range between (1 to 3) %/°C. This slope is influenced by the geochemistry, and can be easily determined in a laboratory.

At extremely low temperatures (not far from absolute 0 K), a few materials have been found to exhibit very high electrical conductivity in a phenomenon called superconductivity.

See also

• Classical and quantum conductivity
• Electrical conduction for a discussion of the physical origin of electrical conductivity.
• Electrical resistance
• Electrical resistivity is the inverse of electric conductivity
• Molar conductivity for a discussion of electrolytic conductivity i.e. conductivity due to ions in solution
• SI electromagnetism units
• Transport phenomena
• Thermal conductivity

References

ISBN links support NWE through referral fees

• Giancoli, Douglas. 2007. Physics for Scientists and Engineers, with Modern Physics (Chapters 1-37), 4th ed. Mastering Physics Series. Upper Saddle River, NJ: Prentice Hall. ISBN 978-0136139263.

• Plonus, Martin. 2001. Electronics and Communications for Scientists and Engineers. San Diego: Harcourt/Academic Press. ISBN 0125330847.

• Tipler, Paul Allen, and Gene Mosca. 2004. Physics for Scientists and Engineers, Volume 2: Electricity and Magnetism, Light, Modern Physics, 5th ed. New York: W.H. Freeman. ISBN 0716708108.

External links

• Measurement of the Electrical Conductivity of Glass Melts Measurement Techniques, Definitions, Electrical conductivity Calculation from the Glass Composition
• Periodic Table of Elements Sorted by Electrical Conductivity

Credits

New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

• Electrical conductivity  ^history

The history of this article since it was imported to New World Encyclopedia:

• History of "Electrical conductivity"

Note: Some restrictions may apply to use of individual images which are separately licensed.