Cone (geometry)

This article is about the geometric object. For other uses of the term, see Cone.

A right circular cone and an oblique cone

A cone is a three-dimensional geometric shape consisting of all line segments joining a single point (the apex or vertex) to every point of a two-dimensional figure (the base).

The axis of a cone is the line joining the apex to the center of the base (suitably defined). In common usage and in elementary geometry, the base is a circle, and the axis is perpendicular to the plane of the base, i.e. cones are assumed to be right circular. A cone with its apex cut off by a plane parallel to its base is called a truncated cone or frustum.

The term "cone" sometimes refers just to the lateral surface of a solid cone, the locus of all line segments that join the apex to the perimeter of the base.

In mathematical usage, the word "cone" is used also for an infinite cone, the union of any set of half-lines that start at a common apex point. This kind of cone does not have a bounding base, and extends to infinity. A doubly infinite cone, or double cone, is the union of any set of straight lines that pass through a common apex point, and therefore extends symmetrically on both sides of the apex. Depending on the context, the word may also mean specifically a convex cone or a projective cone.

The boundary of an infinite or doubly infinite cone is a conical surface. For infinite cones, the word axis usually refers to the axis of rotational symmetry (if any).

Elements and special cases

The perimeter of the base is called the directrix, and each of the line segments between the directrix and apex is a generatrix of the lateral surface. (For the connection between this sense of the term "directrix" and the directrix of a conic section, see dandelin spheres.)

In general, the base of a cone may have any shape, and the apex may lie anywhere. However, it is often assumed that the base is bounded and has nonzero area, and that the apex lies outside the plane of the base. Circular cones and elliptical cones have, respectively, circular and elliptical bases. If the axis of the cone is at right angles to its base then it is said to be a right cone, otherwise it is an oblique cone.

A pyramid is a special type of cone with a polygonal base.

The base radius of a circular cone is the radius of its base; often this is simply called the radius of the cone. The aperture of a right circular cone is the maximum angle between two generatrix lines; if the generatrix makes and angle θ to the axis, the aperture is 2θ.

Formulas

See also: Cone (geometry) proofs.

The volume $V$ of any conic solid is one third the area of the base $b$ times the height $h$ (the perpendicular distance from the base to the apex).

$V={\frac {1}{3}}bh$

The center of mass of a conic solid is at 1/4 of the height on the axis.

Right circular cone

For a circular cone with radius r and height h, the formula for volume becomes

$V={\frac {1}{3}}\pi r^{2}h.$

For a right circular cone, the surface area $A$ is

$A=\pi r^{2}+\pi rs\,$   where   $s={\sqrt {r^{2}+h^{2}}}$   is the slant height.

The first term in the area formula, $\pi r^{2}$, is the area of the base, while the second term, $\pi rs$, is the area of the lateral surface.

A right circular cone with height $h$ and aperture $2\theta$, whose axis is the $Z$ coordinate axis and whose apex is the origin, is described parametrically as

$S(s,t,u)=(u\tan s\cos t,u\tan s\sin t,u)$

where $s,t,u$ range over $[0,\theta )$, $[0,2\pi )$, and $[0,h]$, respectively.

In implicit form, the same solid is defined by the inequalities

$\{S(x,y,z)\leq 0,z\geq 0,z\leq h\}$,

where

$S(x,y,z)=(x^{2}+y^{2})(\cos \theta )^{2}-z^{2}(\sin \theta )^{2}\,$.

More generally, a right circular cone with vertex at the origin, axis parallel to the vector $d$, and aperture $2\theta$, is given by the implicit vector equation $S(u)=0$ where

$S(u)=(u\cdot d)^{2}-(d\cdot d)(u\cdot u)(\cos \theta )^{2}$   or   $S(u)=u\cdot d-|d||u|\cos \theta$

where $u=(x,y,z)$, and $u\cdot d$ denotes the dot product.

See also

• Cone (topology)
• Pyramid (geometry)
• Conic section
• Quadric
• Ruled surface
• Hyperboloid

External links

• Spinning Cone from Math Is Fun
• Paper model cone

az:Konus bg:Конус ca:Con cs:Kužel de:Kegel (Geometrie) es:Cono (geometría) eo:Konuso eu:Kono (geometria) fr:Cône (géométrie) ko:원뿔 it:Cono (solido) he:חרוט lt:Kūgis hu:Kúp nl:Kegel (ruimtelijke figuur) ja:円錐 no:Kjegle nn:Kjegle pl:Stożek (geometria) pt:Cone ro:Con qu:Chhuquruqutu ru:Конус simple:Cone sk:Kužeľ sr:Купа (геометрија) fi:Kartio sv:Kon ta:கூம்பு tr:Koni vi:Mặt nón zh:圆锥