Difference between revisions of "Trinitrotoluene" - New World Encyclopedia

From New World Encyclopedia
(imported latest version of article from Wikipedia)
 
(→‎External links: added credit)
Line 64: Line 64:
 
TNT was first synthesised by [[Joseph Wilbrand]] in 1863, and the first large-scale production began in [[Germany]] in 1891.
 
TNT was first synthesised by [[Joseph Wilbrand]] in 1863, and the first large-scale production began in [[Germany]] in 1891.
  
The explosive yield of TNT is considered the standard measure of strength of [[bombs]] and other [[explosives]] (see [[TNT equivalent]]).
+
The explosive yield of TNT is considered the standard measure of strength of [[bombs]] and other [[explosives]] (see [[#TNT equivalent|TNT equivalent]] below).
  
 
==Characteristics==
 
==Characteristics==
Line 93: Line 93:
 
==Preparation==   
 
==Preparation==   
 
The synthesis is done in a stepwise procedure. First, [[toluene]] is nitrated with a mixture of [[sulfuric acid|sulfuric]] and [[nitric acid]]. Even lower-concentration acid mixtures are capable of doing the first and second introduction of a nitrogroup. The nitrogroups decrease the reactivity of the toluene drastically because they are electron-withdrawing groups. After separation, the mono- and dinitrotoluene is fully nitrated with a mixture of nitric acid and [[oleum]] (sulfuric acid with up to 60% dissolved [[sulfur trioxide|SO<sub>3</sub>]]). This mixture is far more reactive and is capable of introducing the last nitrogroup. The waste acid from this process is used for the first step of the reaction in industrial synthesis.
 
The synthesis is done in a stepwise procedure. First, [[toluene]] is nitrated with a mixture of [[sulfuric acid|sulfuric]] and [[nitric acid]]. Even lower-concentration acid mixtures are capable of doing the first and second introduction of a nitrogroup. The nitrogroups decrease the reactivity of the toluene drastically because they are electron-withdrawing groups. After separation, the mono- and dinitrotoluene is fully nitrated with a mixture of nitric acid and [[oleum]] (sulfuric acid with up to 60% dissolved [[sulfur trioxide|SO<sub>3</sub>]]). This mixture is far more reactive and is capable of introducing the last nitrogroup. The waste acid from this process is used for the first step of the reaction in industrial synthesis.
 +
 +
== TNT equivalent ==
 +
 +
'''TNT equivalent''' is a unit of energy commonly used to quantify large amounts of energy. One ton of TNT releases  4.184×10<sup>9</sup> joules upon explosion, therefore 1 kiloton of TNT is 4.184×10<sup>12</sup> [[joules]], and 1 megaton of TNT is  4.184×10<sup>15</sup> joules.
 +
 +
A megaton is a large amount of energy. The first [[atomic bomb]] dropped on [[Hiroshima]] on [[August 6]], [[1945]] exploded with the energy of about 20 kilotons of TNT (~8.4×10<sup>13</sup> joules).
 +
 +
Current [[nuclear warhead]]s in [[Russia]] and the [[USA]] stockpiles range in [[nuclear weapon yield|yield]] from 100 kt to 20 Mt TNT equivalent. The largest bomb ever dropped, the [[Tsar Bomba]], had a yield of about 50 Mt.
 +
 +
About 1 Mt equivalent exploded on the ground or slightly above ground creates a crater about 0.3 miles (0.5 km) in diameter and levels practically everything in a few mile or kilometer radius.
  
 
==See also==
 
==See also==
 +
 
*[[dynamite]]
 
*[[dynamite]]
 
*[[hexanitrobenzene]]
 
*[[hexanitrobenzene]]
Line 106: Line 117:
 
{{ChemicalSources}}
 
{{ChemicalSources}}
  
[[Category:Explosives]]
+
[[Category:Physical sciences]]
[[Category:Explosive chemicals]]
+
[[Category:Chemistry]]
[[Category:Nitro compounds]]
+
[[Category:Technology]]
[[Category:Immunotoxins]]
 
  
[[bg:Тротил]]
+
{{credit2|Trinitrotoluene|93962210|TNT_equivalent|95962715}}
[[cs:Trinitrotoluen]]
 
[[da:Trotyl]]
 
[[de:Trinitrotoluol]]
 
[[es:Trinitrotolueno]]
 
[[eo:TNT]]
 
[[eu:TNT]]
 
[[fa:تی‌ان‌تی]]
 
[[fr:Trinitrotoluène]]
 
[[ko:트라이나이트로톨루엔]]
 
[[id:Trinitrotoluena]]
 
[[it:Trinitrotoluene]]
 
[[he:TNT]]
 
[[lv:TNT]]
 
[[lt:TNT]]
 
[[hu:Trinitrotoluol]]
 
[[nl:2,4,6-trinitrotolueen]]
 
[[ja:トリニトロトルエン]]
 
[[no:Trinitrotoluen]]
 
[[pl:Trotyl]]
 
[[pt:TNT]]
 
[[ro:Trinitrotoluen]]
 
[[ru:Тринитротолуол]]
 
[[simple:TNT]]
 
[[sl:Trinitrotoluen]]
 
[[fi:TNT]]
 
[[sv:Trotyl]]
 
[[tr:Trinitrotoluen]]
 
[[zh:三硝基甲苯]]
 

Revision as of 21:19, 22 December 2006

Trinitrotoluene
Trinitrotoluene.png
General
Name Trinitrotoluene
Other Names 2-Methyl-1,3,5-trinitrobenzene
2,4,6-Trinitrotoluene
TNT
Trotyl
Empirical formula C7H5N3O6
CAS Number 118-96-7
PubChem 8376
Short description Pale, yellow, needle-shaped crystals
Characteristics
Molar mass 227.131 g/mol
Phase Solid
Shock sensitivity Insensitive
Friction sensitivity Insensitive
Density 1.654 g/cm³
Explosive velocity 6,900 m/s
RE factor 1.00
Melting Point 80.35 °C
Boiling Point 295 °C (Decomposition)
Vapor pressure 5.7 Pa (81 °C)
Solubility
  • Well in ether, acetone, benzene
  • Badly in water
Safety References
NFPA 704

NFPA 704.svg

4
3
4
 
R/S Statements

R: 2-23/24/25-33-51/53
S: 35-45-61

TLV 0.1 mg/m³
Except where noted otherwise, data are given for
materials in their standard state (at 25 °C, 100 kPa)
Infobox disclaimer and references

Trinitrotoluene (TNT) is an explosive. Its empirical formula is C7H5N3O6.

The name for TNT is, in accordance with the nomenclature of the IUPAC, 2-methyl-1,3,5-trinitrobenzene. In this article the more common designation trinitrotoluene is used.

TNT was first synthesised by Joseph Wilbrand in 1863, and the first large-scale production began in Germany in 1891.

The explosive yield of TNT is considered the standard measure of strength of bombs and other explosives (see TNT equivalent below).

Characteristics

Trinitrotoluene takes the form of pale yellow, needle-shaped crystals and can be distilled in a vacuum. It is difficult to dissolve TNT in water; it is more soluble in ether, acetone, benzene and pyridine. With its low melting point of 80.35 °C, TNT can be melted in water vapour and poured into forms. TNT is poisonous and skin contact can cause allergic reactions, causing the skin to turn a bright yellow-orange color.

  • Water solubility: 130 mg/L at 20 °C
  • Steam pressure at 20 °C: 150 to 600 Pa
  • Detonation speed: 6700-7000 m/s 6900 m/s (density: 1,6 g/cm³)
  • Lead block test: 300 ml/10 g
  • Sensitivity to impact: 15 N·m (1.5 kp·m)
  • Friction sensitivity: to 353 N (36 kp) no reaction

Toxicity

Some military testing grounds are contaminated with TNT. Wastewater from munitions programs including contamination of surface and subsurface waters may be colored pink as the result of TNT and RDX contamination. Such contamination, called pinkwater, may be difficult and expensive to remedy.

TNT is quite toxic. It can also be absorbed through the skin, and will cause irritation and bright yellow staining. During the First World War, munition workers who handled the chemical found that their skin turned bright yellow, which led to the nickname "canary girls" or simply "canaries" to describe such workers. TNT would also eventually make ginger hair turn green. A 1916 British Government inquiry on female workers at the Royal Arsenal, Woolwich found that 37% had severe pains due to loss of appetite, nausea and constipation, 25% suffered from dermatitis, and 34% experienced changes in menstruation. Before respirators and protective grease applied to the skin were introduced, about 100 workers died from the disease.

People exposed to trinitrotoluene over a prolonged period tend to experience anemia and abnormal liver functions. Blood and liver effects, spleen enlargement and other harmful effects on the immune system have also been found in animals that ingested or breathed trinitrotoluene. There is evidence that TNT adversely affects male fertility, and TNT is listed as a possible human carcinogen. Consumption of TNT produces black urine.

History

TNT was first made in 1863 by a German chemist Joseph Wilbrand, but its potential was not seen for several years, mainly because it was so hard to detonate and because it was less powerful than other explosives. Among its advantages, however, is its ability to be safely melted using steam or hot water, allowing it to be poured molten into shell cases. (This is how Vietnamese fighters made their mines out of American shells during the Vietnam War.) It is also so insensitive that, for example, in 1910 it was exempted from the UK's Explosives Act 1875, i.e. not actually being considered an explosive for the purposes of manufacture and storage.

The German armed forces adopted it as an artillery shell filling in 1902. A particular advantage that it gave the German Navy in the First World War was being able to detonate their TNT-filled armour-piercing shells after they had penetrated the armour of British capital ships, whereas the British lyddite-filled shells tended to explode as soon as they struck the German armour, and thus expended much of their energy outside the ship. The British gradually started using it as replacement for lyddite in 1907.

Because of the insatiable demand for explosives during the Second World War, TNT was frequently mixed with 40%-80% ammonium nitrate, producing an explosive called amatol. Although nearly as powerful as TNT (and much less expensive) amatol suffered from the slight disadvantage of being hygroscopic (prone to absorbing water). Another variation called minol, consisting of amatol mixed with about 20% aluminum powder, was used by the British in mines and depth charges. Although blocks of pure TNT are available in various sizes (e.g. 250 g, 500 g and 1 kg) it is more commonly encountered in explosive blends which comprise a variable percentage of TNT plus other ingredients, e.g. torpex, tritonal, pentolite and Composition B.

Preparation

The synthesis is done in a stepwise procedure. First, toluene is nitrated with a mixture of sulfuric and nitric acid. Even lower-concentration acid mixtures are capable of doing the first and second introduction of a nitrogroup. The nitrogroups decrease the reactivity of the toluene drastically because they are electron-withdrawing groups. After separation, the mono- and dinitrotoluene is fully nitrated with a mixture of nitric acid and oleum (sulfuric acid with up to 60% dissolved SO3). This mixture is far more reactive and is capable of introducing the last nitrogroup. The waste acid from this process is used for the first step of the reaction in industrial synthesis.

TNT equivalent

TNT equivalent is a unit of energy commonly used to quantify large amounts of energy. One ton of TNT releases 4.184×109 joules upon explosion, therefore 1 kiloton of TNT is 4.184×1012 joules, and 1 megaton of TNT is 4.184×1015 joules.

A megaton is a large amount of energy. The first atomic bomb dropped on Hiroshima on August 6, 1945 exploded with the energy of about 20 kilotons of TNT (~8.4×1013 joules).

Current nuclear warheads in Russia and the USA stockpiles range in yield from 100 kt to 20 Mt TNT equivalent. The largest bomb ever dropped, the Tsar Bomba, had a yield of about 50 Mt.

About 1 Mt equivalent exploded on the ground or slightly above ground creates a crater about 0.3 miles (0.5 km) in diameter and levels practically everything in a few mile or kilometer radius.

See also

  • dynamite
  • hexanitrobenzene
  • megaton
  • tetryl

External links

Template:ChemicalSources

Credits

New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

The history of this article since it was imported to New World Encyclopedia:

Note: Some restrictions may apply to use of individual images which are separately licensed.