Plasma display panel

An example of a plasma display

A plasma display panel (PDP) is a type of flat panel display now commonly used for large TV displays (typically above 37-inch or 940 mm). Many tiny cells located between two panels of glass hold an inert mixture of noble gases (neon and xenon). The gas in the cells is electrically turned into a plasma which then excites phosphors to emit light. Plasma displays are commonly confused with LCDs, another lightweight flatscreen display but very different technology.

History

Plasma displays were first used in PLATO computer terminals. This PLATO V model illustrates the display's monochromatic orange glow as seen in 1981.

The plasma video display was co-invented on 1964 in the University of Illinois at Urbana-Champaign by Donald Bitzer, H. Gene Slottow, and graduate student Robert Willson for the PLATO Computer System. The original monochrome (orange, green, yellow) video display panels were very popular in the early 1970s because they were rugged and needed neither memory nor circuitry to refresh the images. A long period of sales decline occurred in the late 1970s as semiconductor memory made CRT displays cheaper than plasma displays. Template:Histfact Nonetheless, the plasma displays' relatively large screen size and thin body made them suitable for high-profile placement in lobbies and stock exchanges.

In 1983, IBM introduced a 19-inch (48 cm) orange-on-black monochrome display (model 3290 'information panel') which was able to show four simultaneous IBM 3270 virtual machine (VM) terminal sessions. That factory was transferred in 1987 to startup company Plasmaco, which Dr. Larry F. Weber, one of Dr. Bitzer's students, founded with Stephen Globus, as well as James Kehoe, who was the IBM plant manager.

In 1992, Fujitsu introduced the world's first 21-inch (53 cm) full-color display. It was a hybrid, based upon the plasma display created at the University of Illinois at Urbana-Champaign and NHK STRL, achieving superior brightness.

In 1996, Matsushita Electrical Industries (Panasonic) purchased Plasmaco, its color AC technology, and its American factory. In 1997, Fujitsu introduced the first 42-inch (107 cm) plasma display; it had 852x480 resolution and was progressively scanned. Also in 1997, Pioneer started selling the first plasma television to the public. Many current plasma televisions, thinner and of larger area than their predecessors, are in use. Their thin size allows them to compete with large area projection screens.

Screen sizes have increased since the introduction of plasma displays. The largest plasma video display in the world at the 2008 Consumer Electronics Show in Las Vegas, Nevada, USA, North America was a 150-inch (381 cm) unit manufactured by Matsushita Electrical Industries (Panasonic) standing 6 ft (180 cm) tall by 11 ft (330 cm) wide and expected to initially retail at US$150,000.

Until quite recently, the superior brightness, faster response time, greater color spectrum, and wider viewing angle of color plasma video displays, when compared with LCD televisions, made them one of the most popular forms of display for HDTV flat panel displays. For a long time it was widely believed that LCD technology was suited only to smaller sized televisions, and could not compete with plasma technology at larger sizes, particularly 40 inches (100 cm) and above. Since then, improvements in LCD technology have narrowed the technological gap. The lower weight, falling prices, higher available resolution (important for HDTV), and often lower electrical power consumption of LCDs make them competitive with plasma television sets. As of late 2006, analysts note that LCDs are overtaking plasmas, particularly in the important 40-inch (1.0 m) and above segment where plasma had previously enjoyed strong dominance. Another industry trend is the consolidation of manufacturers of plasma displays, with around fifty brands available but only five manufacturers. In the 1Q of 2008 a comparison of worldwide TV sales breaks down to 22.1 million for CRT, 21.1 million for LCD, 2.8 million for Plasma, and 124 thousand for rear-projection.

In an effort to compete with smaller LCD panels in the market Vizio released the VP322, a 32" plasma television, in May of 2008. This display uses a 32" panel made by LG and has a contrast ratio of 30,000:1.

General characteristics

Plasma displays are bright (1000 lux or higher for the module), have a wide color gamut, and can be produced in fairly large sizes, up to 381 cm (150 inches) diagonally. They have a very low-luminance "dark-room" black level compared to the lighter grey of the unilluminated parts of an LCD screen. The display panel is only about 6 cm (2.5 inches) thick, while the total thickness, including electronics, is less than 10 cm (4 inches). Plasma displays use as much power per square meter as a CRT or an AMLCD television. Power consumption varies greatly with picture content, with bright scenes drawing significantly more power than darker ones. Nominal power rating is typically 400 watts for a 50-inch (127 cm) screen. Post-2006 models consume 220 to 310 watts for a 50-inch (127 cm) display when set to cinema mode. Most screens are set to 'shop' mode by default, which draws at least twice the power (around 500-700 watts) of a 'home' setting of less extreme brightness. ^{[citation needed]}

The lifetime of the latest generation of plasma displays is estimated at 60,000 hours of actual display time, or 27 years at 6 hours per day. This is the estimated time over which maximum picture brightness degrades to half the original value, not catastrophic failure.

Competing displays include the CRT, OLED, AMLCD, DLP, SED-tv, and field emission flat panel displays. Advantages of plasma display technology are that a large, very thin screen can be produced, and that the image is very bright and has a wide viewing angle.

Functional details

Composition of plasma display panel

The xenon and neon gas in a plasma television is contained in hundreds of thousands of tiny cells positioned between two plates of glass. Long electrodes are also sandwiched between the glass plates, in front of and behind the cells. The address electrodes sit behind the cells, along the rear glass plate. The transparent display electrodes, which are surrounded by an insulating dielectric material and covered by a magnesium oxide protective layer, are mounted in front of the cell, along the front glass plate. Control circuitry charges the electrodes that cross paths at a cell, creating a voltage difference between front and back and causing the gas to ionize and form a plasma. As the gas ions rush to the electrodes and collide, photons are emitted.

In a monochrome plasma panel, the ionizing state can be maintained by applying a low-level voltage between all the horizontal and vertical electrodes – even after the ionizing voltage is removed. To erase a cell all voltage is removed from a pair of electrodes. This type of panel has inherent memory and does not use phosphors. A small amount of nitrogen is added to the neon to increase hysteresis.

In color panels, the back of each cell is coated with a phosphor. The ultraviolet photons emitted by the plasma excite these phosphors to give off colored light. The operation of each cell is thus comparable to that of a fluorescent lamp.

Every pixel is made up of three separate subpixel cells, each with different colored phosphors. One subpixel has a red light phosphor, one subpixel has a green light phosphor and one subpixel has a blue light phosphor. These colors blend together to create the overall color of the pixel, analogous to the "triad" of a shadow-mask CRT. By varying the pulses of current flowing through the different cells thousands of times per second, the control system can increase or decrease the intensity of each subpixel color to create billions of different combinations of red, green and blue. In this way, the control system can produce most of the visible colors. Plasma displays use the same phosphors as CRTs, which accounts for the extremely accurate color reproduction.

Contrast ratio claims

Contrast ratio is the difference between the brightest and darkest parts of an image, measured in discrete steps, at any given moment. Generally, the higher the contrast ratio, the more realistic the image is. Contrast ratios for plasma displays are often advertised as high as 30,000:1. On the surface, this is a significant advantage of plasma over display technologies other than OLED. Although there are no industry-wide guidelines for reporting contrast ratio, most manufacturers follow either the ANSI standard or perform a full-on-full-off test. The ANSI standard uses a checkered test pattern whereby the darkest blacks and the lightest whites are simultaneously measured, yielding the most accurate "real-world" ratings. In contrast, a full-on-full-off test measures the ratio using a pure black screen and a pure white screen, which gives higher values but does not represent a typical viewing scenario. Manufacturers can further artificially improve the reported contrast ratio by increasing the contrast and brightness settings to achieve the highest test values. However, a contrast ratio generated by this method is misleading, as content would be essentially unwatchable at such settings.

Plasma is often cited as having better black levels (and contrast ratios), although both plasma and LCD have their own technological challenges. Each cell on a plasma display has to be precharged before it is due to be illuminated (otherwise the cell would not respond quickly enough) and this precharging means the cells cannot achieve a true black. Some manufacturers have worked hard to reduce the precharge and the associated background glow, to the point where black levels on modern plasmas are starting to rival CRT. With LCD technology, black pixels are generated by a light polarization method and are unable to completely block the underlying backlight.

Screen burn-in

An example of a plasma display that has suffered severe burn-in from stationary text

With phosphor-based electronic displays (including cathode-ray and plasma displays), the prolonged display of a menu bar or other graphical elements over time can create a permanent ghost-like image of these objects. This is due to the fact that the phosphor compounds which emit the light lose their luminosity with use. As a result, when certain areas of the display are used more frequently than others, over time the lower luminosity areas become visible to the naked eye and the result is called burn-in. While a ghost image is the most noticeable effect, a more common result is that the image quality will continuously and gradually decline as luminosity variations develop over time, resulting in a "muddy" looking picture image.

Plasma displays also exhibit another image retention issue which is sometimes confused with burn-in damage. In this mode, when a group of pixels are run at high brightness (when displaying white, for example) for an extended period of time, a charge build-up in the pixel structure occurs and a ghost image can be seen. However, unlike burn-in, this charge build-up is transient and self corrects after the display has been powered off for a long enough period of time, or after running random broadcast TV type content.

Plasma manufacturers have over time managed to devise ways of reducing the past problems of image retention with solutions involving gray pillarboxes, pixel orbiters and image washing routines.

Seamless Plasma Displays

Seamless plasma displays have appeared in an effort to address the need of consumers for a large plasma screens. While traditional plasma displays are characterized by a thick bezel surrounding the screen, new seamless plasma displays offers 4-7 mm gap in video walls. This technology allows constructing video walls of multiple plasma panels tiled together contiguously, in order to form one large screen.

Unlike traditional plasma displays, seamless plasma panels must be used along with control software system, which make it possible to display single or multiple images on the video wall at one time, to switch between content from multiple inputs, to adjust color balance in the video wall, etc.

External links

Plasma display panel at HowStuffWorks

• Plasma.com classroom main page Articles on Plasma TV technology and installation
• Schematic drawing and explanation of a typical color plasma display
• HowStuffWorks "How plasma displays work"
• LCD or plasma? (PCWorld.ca, written February 14, 2007)
• Plasma display panels: The colorful history of an Illinois technology by Jamie Hutchinson, Electrical and Computer Engineering Alumni News, Winter 2002-2003
• Plasma is better than LCD? according to Panasonic
• Plasma TV vs. LCD

ar:شاشة بلازما br:Skramm plasma ca:Pantalla de plasma da:Plasmaskærm de:Plasmabildschirm es:Pantalla de plasma fr:Écran à plasma ko:플라스마 디스플레이 id:Tampilan plasma it:Schermo al plasma he:צג פלזמה lv:Plazmas displejs ms:Paparan plasma nl:Plasmascherm ja:プラズマディスプレイ no:Plasmaskjerm pl:Wyświetlacz plazmowy pt:Tela de plasma ru:Плазменная панель fi:Plasmapaneelinäyttö sv:Plasmaskärm zh:等離子顯示屏