Microforms are microreproductions of documents for transmission, storage, reading and printing. Microform images are commonly reduced about 25 times from the original document size. For special purposes, greater optical reductions may be used. All microform images may be provided as positives or negatives, more often the second. Microforms often come in three formats: microfilm (reels), aperture cards and microfiche (flat sheets). Microcards were similar to microfiche, but printed on paper cardboard rather than photographic films.
In the middle of the twentieth century, microforms became popular in library communities. Periodicals, books, and other collections were converted into microform. However, digital preservation has become increasingly popular, causing the decline of microform preservation.
Microform in the twentieth century
Microfom is used primarily for the preservation of documents, images, architectural or technological drawings, maps, and other forms of information. While microform was a primary preservation method in the twentieth century, digital preservation has increasingly become popular since.
First, filmed images are analog images of the original, reduced in size, and users can access the information with a simple equipment such as a magnifier. Digital technologies, however, require much more complex devices. Furthermore, when computer programs are updated, the original digital data may become inaccessible. Furthermore, the life span of CDs, DVDs, and other digital storage devices is still uncertain. For these reasons, digital preservation requires constant data migration. On the other hand, microforms are expected to last about 500 years, if they are properly preserved.
While microform has a number of advantages, it lacks some functions digital preservation that has: search capability; quick data transfer from one location to another location; massive storage capacity; easy manipulation of data.
To remedy some of those disadvantages, data preserved in microform are also digitized. At some institutions, users can choose to access information storage in various formats. For example, the Library of Congress in the U.S. provides copies of their collection in various formats. Users can choose and request from the followings:
- 35mm microfilm
- film to paper
- original filming
- cartographic scanning
- digital images to CD-ROM
- all formats of photographic reproduction
Today, libraries and archives use multiple preservation medium including paper, microform, and digital medium. The same information is often preserved in multiple formats. Since each format has its own advantages and disadvantages, all of these formats will be used in the near future.
Using the Daguerreotype process, John Benjamin Dancer was one of the first to produce micro-photographs, in 1839. He achieved a reduction ratio of 160:1. Dancer perfected his reduction procedures with Frederick Scott Archer’s wet collodion process, developed in 1850-1851, but he dismissed his decades-long work on micro-photographs as a personal hobby, and did not document his procedures. That microphotography could be no more than a novelty was an opinion shared by the 1858 Dictionary of Photography, which called the process “somewhat trifling and childish.”
Microphotography was first suggested as a document preservation method in the early 1850s – in 1851 by James Glaisher, an astronomer, and in 1853 by John Herschel. Both men attended the 1851 Great Exhibition in London, where the exhibition on photography greatly influenced Glaisher: he called it "the most remarkable discovery of modern times," and argued in his official report for using microphotography to preserve documents.
Microfilm first saw military use during the Franco-Prussian War of 1870–1871. During the Siege of Paris, the only way for the provincial government in Tours to communicate with Paris was by pigeon post, and, as the pigeons could not carry paper dispatches, the Tours government turned to microfilm. Using a microphotography unit evacuated from Paris before the siege, clerks in Tours photographed paper dispatches and compressed them to microfilm, which were carried by homing pigeons into Paris and projected by magic lantern while clerks copied the dispatches onto paper.
The developments in microphotography continued through the next decades, but it was not until the turn of the century that its potential for practical usage was seized by a wider audience. In 1896, Canadian engineer Reginald A. Fessenden suggested microforms as a compact solution to engineers' unwieldy, but frequently consulted materials. He proposed that up to 150,000,000 words could be made to fit in a square inch, and that a one foot cube could contain 1.5 million volumes.
In 1906, Paul Otlet and Robert Goldschmidt proposed the livre microphotographique as a way to alleviate the cost and space limitations imposed by the codex format. Otlet’s overarching goal was to create a World Center Library of Juridical, Social and Cultural Documentation, and he saw microfiche as way to offer a stable and durable format that was inexpensive, easy to use, easy to reproduce, and extremely compact. In 1925, the team spoke of a massive library where each volume existed as master negatives and positives, and where items were printed on demand for interested patrons.
Microform use in libraries
At the annual meeting of 1936, the American Library Association endorsed microforms. Before this official acceptance, microforms were used in related fields: between 1927 and 1935, the Library of Congress (U.S.) microfilmed more than three million pages of books and manuscripts in the British Library; in 1929 the Social Science Research Council and the American Council of Learned Societies joined to create a Joint Committee on Materials Research, which looked closely at microform’s potential to serve small print runs of academic or technical materials; in 1933, Charles C. Peters developed a method to microformat dissertations; in 1934 the United States National Agriculture Library implemented the first microform print-on-demand service, which was quickly followed by a similar commercial concern, Science Service, and in 1938 University Microfilms was established and the Harvard Foreign Newspapers Microform Project was implemented.
Libraries began using microfilm in the early 1900s as a preservation strategy for their deteriorating newspaper collections. Books and newspapers that were deemed in danger of decay could be preserved on film and thus access and use could be increased. Microfilming was also a space-saving measure. In his 1945 book, “The Scholar and the Future of the Research Library,” Fremont Rider calculated that research libraries were doubling in space every sixteen years. His suggested solution was microfilming, specifically with his invention, the microcard. Once items were put onto film, they could be removed from circulation and additional shelf space would be made available for rapidly expanding collections. The microcard was superseded by microfiche. By the 1980s, microfilming had become standard policy in libraries as a means of reformatting both books and newspapers.
In 1940, the format most broadly used today – microfilm – was developed. Formats it bested include the Photoscope, the Film-O-Graph, the Fiske-O-Scope, filmslides.
Early cut sheet microforms and microfilms (to the 1930s) were printed on a nitrate film and pose high risks to their holding institutions, as nitrate film is explosive and flammable. From the late 1930s to the 1980s, microfilms were usually printed on a cellulose acetate base, which is prone to tears, vinegar syndrome and redox blemishes. Vinegar syndrome is the result of chemical decay and produces "buckling and shrinking, embrittlement, and bubbling". Redox blemishes are yellow, orange, red, or spots 15-150 micrometres in diameter created by oxidative attacks on the film, and are largely due to poor storage conditions.
The medium has numerous advantages:
- It is compact, with far smaller storage costs than paper documents. Normally 98 document size pages fit on one fiche. When compared to filing paper, microforms can reduce space storage requirements by up to 95 percent.
- It is cheaper to distribute than paper copy. Most microfiche services get a bulk discount on reproduction rights, and have lower reproduction and carriage costs than a comparable amount of printed paper.
- It is a stable archival form when properly processed. Preservation standard microfilms use wet-processed silver halide dyes in hard gelatin emulsion on a polyester base. With appropriate storage conditions, this film has a life expectancy of 500 years. Unfortunately, in tropical climates with high humidity, fungus eats the gelatin used to bind the silver halide. Thus, diazo-based systems with lower archival lives (20 years) which have polyester or epoxy surfaces are used.
- Since it is analog (an actual image of the original data), it is easy to view. Unlike digital media, the format requires no software to decode the data stored thereon—it is instantly comprehensible to persons literate in the language; the only equipment that is needed is a simple magnifying glass. This reduces the possibility of obsolescence.
- The principal disadvantage of microforms is that the image is too small to read with the naked eye. Libraries must use special readers that project full-size images on a ground-glass screen.
- Reader machines used to view microfilm are often difficult to use, requiring the user to carefully wind and rewind until they have arrived at the point where the data they are looking for is stored. Also, photographic illustrations reproduce poorly in microform format, with the image usually not being as sharp as the original. The last problem with the machines is that printers are not always available, limiting the user's ability to make copies for their own purposes.
- Color microfilm is extremely expensive, thus discouraging most libraries wishing to use microfilm from having color material available. This results in the loss of some information, as color materials will be preserved using regular microfilm in order to save money.
- When stored in the highest-density drawers, it is easy to misfile a fiche, which is thereafter unavailable. Some libraries therefore keep the microfiche cabinet in a restricted area, and retrieve fiches on demand. Some fiche services use lower-density drawers with labelled pockets for each card.
- A conventional photocopier cannot reproduce the images. Libraries using microfiche often have a few viewers that can produce a photocopy of an image, for a nominal fee.
- Like all analog media formats, microfiche lacks features taken for granted by users of digital media. Analog copies degrade with each generation, while digital copies have much higher copying fidelity. Digital data can also be indexed and searched easily.
Readers and printers
Desktop readers are boxes with a translucent screen at the front on to which is projected an image from a microform. They have suitable fittings for whatever microform is in use. They may offer a choice of magnifications. They often have powered movement of roll film. When coding blips are recorded on the film a reader is used that can read the blips to find any required image.
Portable readers are plastic devices that fold for carrying, when open they project an image from microfiche on to a reflective screen.
A microfilm printer contains a xerographic copying process, like a photocopier. The image to be printed is projected with synchronised movement on to the drum. These devices offer either small image preview for the operator or full size image preview, when it is called a reader printer. Microform printers usually accept positive or negative films, to give positive images on paper.
Newer readers allow the user to scan a microform image and save it as a digital file.
- Flat film
- 105 x 148 mm flat film is used for micro images of very large engineering drawings. These may carry a title photographed or written along one edge. Typical reduction is about 20, representing a drawing that is 2.00 x 2.80 metres, that is 79 x 110 inches (2,800 mm). These films are stored as microfiche.
- motion picture standard is used, usually unperforated. Roll microfilm is stored on open reels or put into cassettes. The standard length for using roll film is 30.48 m (100 ft). One roll of 35 mm film may carry 600 images of large engineering drawings or 800 images of broadsheet newspaper pages. 16 mm film may carry 2,400 images of letter sized images as a single stream of micro images along the film set so that lines of text are parallel to the sides of the film or 10,000 small documents, perhaps cheques or betting slips, with both sides of the originals set side by side on the film.
- Aperture cards
To create microform media, a planetary camera is mounted with vertical axis above a copy that is stationary during exposure. A flow camera moves copy smoothly through the camera to expose film which moves with the reduced image. Alternatively, it may be produced by computers, i.e. COM (computer output microfilm).
Normally microfilming uses high resolution panchromatic high resolution monochrome stock. Positive color film giving good reproduction and high resolution can also be used. Roll film is provided 16, 35 and 105 mm wide in lengths of 30 metres (100 ft) and longer, and is usually unperforated. Roll film is developed, fixed and washed by continuous processors.
Sheet film is supplied in ISO A6 size. This is either processed by hand or using a dental X-ray processor. Camera film is supplied ready mounted in aperture cards. Aperture cards are developed, fixed and washed immediately after exposure by equipment fitted to the camera.
- Flat film
The simplest microfilm camera that is still in use is a rail mounted structure at the top of which is a bellows camera for 105 x 148 mm film. A frame or copy board holds the original drawing vertical. The camera has a horizontal axis which passes through the centre of the copy. The structure may be moved horizontally on rails.
In a darkroom a single film may be inserted into a dark slide or the camera may be fitted with a roll film holder which after an exposure advances the film into a box and cuts the frame off the roll for processing as a single film.
- Roll film
For engineering drawings a freestanding open steel structure is often provided. A camera may be moved vertically on a track. Drawings are placed on a large table for filming, with centres under the lens. Fixed lights illuminate the copy. These cameras are often over 3 metres (10 feet) high. These cameras accept roll film stock of 35 or 16 mm.
For office documents a similar design may be used but bench standing. This is a smaller version of the camera described above. These are provided either with the choice of 16 or 35 mm film or accepting 16 mm film only. Non adjustable versions of the office camera are provided. These have a rigid frame or an enveloping box that holds a camera at a fixed position over a copy board. If this is to work at more than one reduction ratio there are a choice of lenses.
Some cameras expose a pattern of light, referred to as blips, to digitally identify each adjacent frame. This pattern is copied whenever the film is copied for searching.
- Flow roll film cameras
A camera is built into a box. In some versions this is for bench top use, other versions are portable. The operator maintains a stack of material to be filmed in a tray, the camera automatically takes one document after another for advancement through the machine. The camera lens sees the documents as they pass a slot. Film behind the lens advances exactly with the image.
Special purpose flow cameras film both sides of documents, putting both images side by side on 16 mm film. These cameras are used to record cheques and betting slips.
- Microfiche camera
All microfiche cameras are planetary with a step and repeat mechanism to advance the film after each exposure. The simpler versions use a dark slide loaded by the operator in a dark room; after exposure the film is individually processed, which may be by hand or using a dental X-ray processor. Cameras for high output are loaded with a roll of 105 mm film. The exposed film is developed as a roll; this is sometimes cut to individual fiche after processing or kept in roll form for duplication.
- Computer Output Microfilm
Equipment is available that accepts a data stream from a mainframe computer. This exposes film to produce images as if the stream had been sent to a line printer and the listing had been microfilmed. Because of the source one run may represent many thousands of pages.
Within the equipment character images are made by a light source, this is the negative of text on paper. COM is sometimes processed normally. Other applications require that image appears as a conventional negative; the film is then reversal processed. This outputs either 16 mm film or fiche pages on a 105 mm roll.
Because listing characters are a simple design, a reduction ratio of 50 gives good quality and puts about 300 pages on a microfiche. A microfilm plotter, sometimes called an aperture card plotter, accepts a stream that might be sent to a computer pen plotter. It produces corresponding frames of microfilm. These produce microfilm as 35 or 16 mm film or aperture cards.
Storage and preservation
Low temperatures and low relative humidity promote chemical stability. Microfilms should be stored at temperatures less than 21˚ Celsius (70˚ Fahrenheit) with relative humidity less than 60% and good air circulation to inhibit fungus or mold germination.
The ANSI/NAPM IT9.11 standard specifies the following combinations of temperature and relative humidity for extend-term storage of black and white microfilms of all types: 21˚C (70˚F) with RH of 20-30%; 15˚C (60˚F) with RH of 20-40%; and 10˚C (50˚F) with RH of 20-50%. For color microfilm, the ANSI/NAPM IT9.11 standard specifies 2˚C (36˚F) with RH of 20-30%. William Saffady recommends that color microfilm be stored in two heat-sealed foil bags for moisture protection and to limit exposure to air.
For medium-term storage (at least ten years), ANSI/NAPM IT9.11 standard specifies that temperature should not exceed 25˚C (77˚F) and RH remain stable within 20-50% range. Humidity variations should not exceed 10% per day, and temperature change should be minimized.
Microfilm should be stored in dark enclosures to minimize damage from light. Enclosures should comply with preservation standards.
Microfilm storage areas should be located in a fire-resistant space that is kept clean and free of dust particles and other contaminants, as well as certain gases such as sulfur dioxide, hydrogen sulfide, ammonia, and ozone. All building materials and storage equipment should be noncombustible and noncorrosive.
Microfilms should be regularly inspected for signs of deterioration.
All regular microfilm copying involves contact exposure under pressure. Then the film is processed to provide a permanent image. Hand copying of single fiche or aperture cards uses exposure over a light box and individually processing of the film. Roll films are contact exposed round a glass cylinder containing a lamp. Processing may be in the same machine or separately.
Silver halide film is a slow version of camera film with a robust top coat. It is suitable for prints or for use as an intermediate from which further prints may be produced. The result is a negative copy. Preservation standards require a master negative, a duplicate negative, and a service copy (positive). Master negatives are kept in deep storage, and duplicate negatives are used to create service copies, which are the copies available to researchers. This multi-generational structure ensures the preservation of the master negative.
Diazo-sensitised film for dye coupling in ammonia gives blue or black dye positive copies. The black image film can be used for further copying.
Vesicular film is sensitised with a diazo dye, which after exposure is developed by heat. Where light has come to the film remains clear, in the areas under the dark image the diazo compound is destroyed quickly, releasing millions of minute bubbles of nitrogen into the film. This produces an image that diffuses light. It produces a good black appearance in a reader, but it cannot be used for further copying.
These conversions may be applied to camera output or to release copies. Single microfiche are cut from rolls of 105 mm film. A bench top device is available that enables an operator to cut exposed frames of roll film and fit these into ready made aperture cards.
Transparent jackets are made A5 size each with 6 pockets into which strips of 16 mm film may be inserted, so creating microfiche. Equipment allows an operator to insert strips from a roll of film. This is particularly useful as frames may be added to a fiche at any time. The pockets are made using a thin film so that duplicates may be made from the assembled fiche.
Another type of conversion is microform to digital, which is popular today. This is done using an optical scanner that projects the film onto a CCD array and captures it in a raw digital format.
The physical condition of microfilm greatly impacts the quality of the digitized copy. Microfilm with a cellulose acetate base (popular through the 1970s) is frequently subject to vinegar syndrome, redox blemishes, and tears, and even preservation standard silver halide film on a polyester base can be subject to silvering and degradation of the emulsion—all issues which affect the quality of the scanned image.
Digitizing microfilm can be inexpensive when automated scanners are employed. The Utah Digital Newspapers Program has found that, with automated equipment, scanning can be performed at $0.15 per page.
For the resulting files to be useful, they must be organized in some way. This can be accomplished in a variety of different ways, dependent on the source media and the desired usage. In this regard, aperture cards with Hollerith information are probably the easiest since image data can be extracted from the card itself if the scanner supports it. Some types of microfilm will contain a counter next to the images, these can be referenced to an already existing database. Other microfilm reels will have a 'blip' system: small marks next to the images of varying lengths used to indicate document hierarchy (longest: root, long: branch, short: leaf). If the scanner is able to capture and process these then the image files can be arranged in the same manner. Optical character recognition is also frequently employed to provide automated full-text searchable files. Common issues that affect the accuracy of OCR applied to scanned images of microfilm include unusual fonts, faded printing, shaded backgrounds, fragmented letters, skewed text, curved lines and bleed through on the originals. For film types with no distinguishing marks, or when OCR is impossible (handwriting, layout issues, degraded text), the data must be entered in manually - a very time-consuming process.
- FAQs, Photoduplication Service, Library of Congress. Retrieved July 16, 2008.
- Allen B. Veaner. Studies in Micropublishing, 1853-1976: Documentary Sources. (Westport, CT: Microform Review Inc, 1976), 88. Originally published in Dictionary of Photography (1858).
- Great Exhibition. Exhibition of the Works of Industry of All Nations, 1851 Prospectuses of Exhibitors. (Aldershot, Hampshire: Gregg, 1988).
- "The Pigeon Post into Paris 1870-1871", The History of Microfilm: 1839-present. UCLA Retrieved July 15, 2008.
- Alan M. Meckler. Micropublishing: A History of Scholarly Micropublishing in America, 1938-1980. (Contributions in librarianship and information science, no. 40) (Westport, CT: Greenwood Press, 1982).
- Robert Goldschmidt, and Paul Otlet, "Sur une forme nouvelle du livre—le livre microphotographique," L'Institut international de bibliographie, Bulletin, 1907.
- Goldschmidt, Robert B. and Paul Otlet, "La Conseration et la Diffusion Internationale de la Pensée." Publication no. 144 of the Institut International de Bibliographie (Brussels).
- William Saffady. Micrographics: Technology for the 21st Century. (Prairie Village, KS: ARMA International, 2000), 15.
- Meckler, Alan M. Micropublishing: A History of Scholarly Micropublishing in America, 1938-1980. Contributions in librarianship and information science, no. 40. Westport, Conn: Greenwood Press, 1982.
- Thomas A. Bourke, "The Curse of Acetate; or a Base conundrum Confronted," Microform Review 23 (1) (1994): 15-17.
- Saffady, 99.
- Saffady, 99.
- Mark Sanders, and Mark Martin, "Extra! Extra! Read all about it! Newspaper access in the academic library," Louisiana Libraries 67, no. 1 (Summer 2004): 18-24.
- Sanders and Martin
- Kenning Arlitsch, and John Herbert, "Microfilm, Paper, and OCR: Issues in Newspaper Digitization," Microform & Imaging Review 33 (2) (Spring 2004): 59-67.
- Arlitsch and Herbert
ReferencesISBN links support NWE through referral fees
- Arlitsch, Kenning and John Herbert, "Microfilm, Paper, and OCR: Issues in Newspaper Digitization," Microform & Imaging Review 33 (2) (Spring 2004)
- Ashby, Peter, and Robert Campbell. Microform Publishing. London: Butterworths, 1979. ISBN 9780408106061
- Goldschmidt, Robert and Paul Otlet, "Sur une forme nouvelle du livre—le livre microphotographique," L'Institut international de bibliographie, Bulletin, 1907.
- Goldschmidt, Robert B. and Paul Otlet, "La Conseration et la Diffusion Internationale de la Pensée." Publication no. 144 of the Institut International de Bibliographie (Brussels).
- Great Exhibition. Exhibition of the Works of Industry of All Nations, 1851 Prospectuses of Exhibitors. Aldershot, Hampshire: Gregg, 1988.
- Meckler, Alan M. Micropublishing: A History of Scholarly Micropublishing in America, 1938-1980. (Contributions in librarianship and information science, no. 40). Westport, CT: Greenwood Press, 1982. ISBN 9780313230967
- Rider, F. The scholar and the future of the research library. New York: Hadham Press, 1944.
- Saffady, William. Micrographics: Technology for the 21st Century. Prairie Village, Kansas: ARMA International, 2000. ISBN 9780933887930
- Sanders, Mark and Mark Martin, "Extra! Extra! Read all about it! Newspaper access in the academic library," Louisiana Libraries 67 (1) (Summer 2004): 18-24.
- Teague, Sydney John. Microform Librarianship. London: Butterworths, 1979. ISBN 9780408709309
- Veaner, Allen B. Studies in Micropublishing, 1853-1976: Documentary Sources. Westport, CT: Microform Review Inc, 1976. ISBN 9780913672075
New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:
The history of this article since it was imported to New World Encyclopedia:
Note: Some restrictions may apply to use of individual images which are separately licensed.