Ethylene glycol

From New World Encyclopedia
Ethylene glycol
Ethylene glycol chemical structure.png
Ethylene-glycol-3D-balls.png
Ethylene-glycol-3D-vdW.png
IUPAC name Ethane-1,2-diol
Other names Ethylene glycol
Monoethylene glycol
MEG
1,2-ethanediol
Identifiers
CAS number [107-21-1]
SMILES OCCO
Properties
Molecular formula C2H4(OH)2
Molar mass 62.068 g/mol
Density 1.1132 g/cm³
Melting point

−12.9 °C (260 K)

Boiling point

197.3 °C (470 K)

Solubility in water Miscible with water
in all proportions.
Viscosity 16.1 mPa s [1]
Hazards
MSDS External MSDS
EU classification Harmful (Xn)
NFPA 704

NFPA 704.svg

1
1
0
 
R-phrases R22 R36
S-phrases S26 S36 S37 S39 S45 S53
Flash point 111 °C (closed cup)
Autoignition
temperature
410 °C
Related Compounds
Related diols Propylene glycol, diethylene glycol, triethylene glycol
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)

Ethylene glycol (monoethylene glycol (MEG), 1,2-ethanediol, IUPAC name: ethane-1,2-diol) is an alcohol with two -OH groups (a diol), a chemical compound widely used as an automotive antifreeze. In its pure form, it is an odorless, colorless, syrupy liquid with a sweet taste. Ethylene glycol is toxic.

History

Ethylene glycol was first prepared in 1859 by the French chemist Charles-Adolphe Wurtz. It was produced on a small scale during World War I as a coolant and as an ingredient in explosives. Widespread industrial production began in 1937 when ethylene oxide, a component in its synthesis, became cheaply available.

When first introduced it created a minor revolution in aircraft design because when used in place of water as an engine coolant, its higher boiling point allowed for smaller radiators operating at higher temperatures. Prior to the widespread availability of ethylene glycol, many aircraft manufacturers tried to use evaporative cooling systems which used water at high pressure. Invariably, these proved to be rather unreliable and were easily damaged in combat because they took up large amounts of room on the plane, where they were easily hit by gunfire.

Production

Ethylene glycol is produced from ethylene, via the intermediate ethylene oxide. Ethylene oxide reacts with water to produce ethylene glycol according to the chemical equation

C2H4O + H2O → HOCH2CH2OH

This reaction can be catalyzed by either acids or bases, or can occur at neutral pH under elevated temperatures. The highest yields of ethylene glycol occur at acidic or neutral pH with a large excess of water. Under these conditions, ethylene glycol yields of 90% can be achieved. The major byproducts are the ethylene glycol oligomers diethylene glycol, triethylene glycol, and tetraethylene glycol.

This molecule has been observed in space by Hollis, et al.[2]

Uses

Coolant

The major use of ethylene glycol is as an antifreeze in, for example, automobiles and personal computers. Due to its low freezing point, it is also used as a deicing fluid for windshields and aircraft. Ethylene glycol is also commonly used in chilled water air conditioning systems that place either the chiller or air handlers outside, or systems that must cool below the freezing temperature of water.

Hydrate inhibition

Ethylene glycol is being widely used to inhibit the formation of natural gas clathrates in long multiphase pipelines that convey natural gas from remote gas fields back to an onshore processing facility. Ethylene glycol can be recovered from the natural gas and reused as an inhibitor after a purification treatment that removes water and inorganic salts.

Manufacturing

Ethylene glycol has become increasingly important in the plastics industry for the manufacture of polyester fibers and resins, including polyethylene terephthalate, which is used to make plastic bottles for soft drinks. The antifreeze capabilities of ethylene glycol have made it an important component of vitrification mixtures for low-temperature preservation of biological tissues and organs.

Minor uses of ethylene glycol include the manufacture of capacitors, as a chemical intermediate in the manufacture of 1,4-dioxane and as an additive to prevent corrosion in liquid cooling systems for personal computers.

Chemistry

Ethylene glycol may also be used as a protecting group for carbonyl groups in organic synthesis. Reacting a ketone or aldehyde with ethylene glycol, in the presence of an acid catalyst (e.g. p-toluenesulfonic acid; BF3·Et2O), will give a cyclic acetal — a 1,3-dioxolane, which is resistant to bases and other nucleophiles. The 1,3-dioxolane protecting group can thereafter be removed, e.g. by further acid hydrolysis.[3] In this example, isophorone was protected using ethylene glycol with p-toluenesulfonic acid in moderate yield. Water was removed by azeotropic distillation to shift the equilibrium to the right.[4]

Ethylene glycol protecting group.png

Laboratory use

Ethylene glycol is commonly used in laboratories to precipitate out proteins in solution. This is often an intermediary step in fractionation, purification and/or crystallization. It can be used to protect functional groups from reacting during organic synthesis. To get the functional group back to its original composition, simply add water and acid.

Ethylene glycol is commonly used as a preservative for specimens in schools, frequently during dissection. It is said to be safer than formaldehyde, but the safety is questionable.

Other applications

Ethylene glycol's high boiling point and affinity for water makes it an ideal desiccant for natural gas production. In the field, excess water vapor is usually removed by glycol dehydration. Ethylene glycol flows down from the top of a tower and meets a rising mixture of water vapor and hydrocarbon gases from the bottom. The glycol chemically removes the water vapor, allowing dry gas to exit from the top of the tower. The glycol and water are separated, and the glycol cycles back through the tower.

Instead of removing water ethylene glycol can also be used to depress the temperature at which hydrates are formed. The purity of glycol used for hydrate suppression (mono-ethylene glycol) is typically around 80%, whereas the purity of glycol used for dehydration (tri-ethylene glycol) is typically 95-99+%. Moreover, the injection rate for hydrate suppression is much lower than the circulation rate in a glycol dehydration tower.

Ethylene glycol is also used in the manufacture of some vaccines, but it is not itself present in these injections. It is used as a minor (1–2%) ingredient in shoe polish and also in some inks and dyes. Ethylene glycol has seen some use as a rot and fungal treatment for wood, both as a preventative and a treatment after the fact. It has been used in a few cases to treat partially rotted wooden objects to be displayed in museums. It is one of only a few treatments that are successful in dealing with rot in wooden boats, and is relatively cheap. Ethylene glycol may also be one of the minor ingredients in screen cleaning solutions, along with the main ingredient isopropyl alcohol.

Toxicity

The major danger from ethylene glycol is ingestion. Due to its sweet taste, children and animals will sometimes consume large quantities of it if given access to antifreeze. Ethylene glycol may also be found as a contaminant in moonshine, distilled using an improperly washed car radiator. In many developed countries, a bittering agent called denatonium/denatonium benzoate (known in some locales by the trade name Bitrex), is generally added to ethylene glycol preparations as an adversant (to prevent accidental ingestion.) This embitterment is not yet widespread in the United States.

Ethylene glycol poisoning is a medical emergency and in all cases a poison control center should be contacted or medical attention should be sought. It is highly toxic with an estimated LD100 in humans of approximately 1.4 ml/kg.[5] However, as little as 30 milliliters (2 tablespoons) can be lethal to adults.[6]

Symptoms

Symptoms of ethylene glycol poisoning usually follow a three-step progression, although poisoned individuals will not always develop each stage.[5] Stage 1 consists of neurological symptoms including victims appearing to be intoxicated, exhibiting symptoms such as dizziness, headaches, slurred speech, and confusion. Over time, the body metabolizes ethylene glycol into other toxins, first to glycolaldehyde, which is then oxidized to glycolic acid, glyoxylic acid, and finally oxalic acid. Stage 2 is a result of accumulation of these metabolites and consists of tachycardia, hypertension, hyperventilation, and metabolic acidosis. Stage 3 of ethylene glycol poisoning is the result of kidney injury, leading to acute kidney failure.[7] Oxalic acid reacts with calcium and forms calcium oxalate crystals in the kidney. An estimated 80 percent of kidney stones are calcium oxalate.

Treatment

Initial treatment consists of stabilizing the patient and gastric decontamination. As ethylene glycol is rapidly absorbed, gastric decontamination needs to be performed soon after ingestion to be of benefit. Gastric lavage or nasogastric aspiration of gastric contents are the most common methods employed in ethylene glycol poisoning. Ipecac-induced vomiting or activated charcoal (charcoal does not adsorb glycols) are not recommended. [5]

The antidotes for ethylene glycol poisoning are ethanol or fomepizole; antidotal treatment forms the mainstay of management following ingestion. Ethanol (usually given IV as a 5 or 10 percent solution in 5 percent dextrose and water, but also sometimes given in the form of a strong spirit such as whisky, vodka or gin) acts by competing with ethylene glycol for the enzyme alcohol dehydrogenase thus limiting the formation of toxic metabolites. Fomepizole acts by inhibiting alcohol dehydrogenase, thus blocking the formation of the toxic metabolites.[8]

In addition to antidotes, hemodialysis can be used to enhance the removal of unmetabolized ethylene glycol, as well as its metabolites from the body. Hemodialysis has the added benefit of correcting other metabolic derangements or supporting deteriorating kidney function caused by ethylene glycol ingestion. Often both antidotal treatment and hemodialysis are used together in the treatment of poisoning.

Industrial hazards

Ethylene glycol can begin to breakdown at 230° – 250°F (110° – 121°C). Note that breakdown can occur when the system bulk (average) temperature is below these limits because surface temperatures in heat exchangers and boilers can be locally well above these temperatures.

The electrolysis of ethylene glycol solutions with a silver anode results in an exothermic reaction. In the Apollo 1 fire catastrophe a coolant consisting of ethylene glycol and water was implicated as a possible cause via this reaction. An ethylene glycol–water mixture can be ignited and burns in an atmosphere of pure low pressure oxygen.[citation needed]

See also

Notes

  1. Glenn Elert. 2008. Viscosity. The Physics Hypertextbook. Retrieved September 21, 2008.
  2. J. M. Hollis, F. J. Lovas, P. R. Jewell, and L. H. Coudert. May 20, 2002. Interstellar Antifreeze: Ethylene Glycol. The AstroPhysical Journal. 571:L59–L62.
  3. Greene, Theodora W., and Peter G. M. Wuts. 1999. Protective Groups in Organic Synthesis 3rd ed. New York: Wiley. pp. 312-322. ISBN 0471160199.
  4. Babler, J. H., N. C. Malek, and M. J. Coghlan. 1978. Selective hydrolysis of α,β- and β,γ-unsaturated ketals: method for deconjugation of β,β-disubstituted α,β-unsaturated ketones. J. Org. Chem. 43(9): 1821–1823. doi 10.1021/jo00403a047.
  5. 5.0 5.1 5.2 Brent, J. 2001. Current management of ethylene glycol poisoning. Drugs. 61(7): 979–88. (pmid = 11434452; doi = 10.2165/00003495-200161070-00006).
  6. Field, D. 1985. Acute ethylene glycol poisoning. Crit. Care Med. 13(10): 872–3. (pmid = 4028762; doi = 10.1097/00003246-198510000-00024).
  7. Barceloux, D.G., E.P. Krenzelok, K. Olson, and W. Watson. 1999. American Academy of Clinical Toxicology Practice Guidelines on the Treatment of Ethylene Glycol Poisoning. Ad Hoc Committee. J. Toxicol. Clin. Toxicol. 37(5): 537–60. (pmid=10497633; doi=10.1081/CLT-100102445).
  8. Brent, J., K. McMartin, S. Phillips, K. Burkhart, J. Donovan, M. Wells, and K. Kulig. 1999. Fomepizole for the treatment of ethylene glycol poisoning. Methylpyrazole for Toxic Alcohols Study Group. New Engl. J. Med. 340(11): 832–8. (pmid = 10080845).

References
ISBN links support NWE through referral fees

External links

Credits

New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:

The history of this article since it was imported to New World Encyclopedia:

Note: Some restrictions may apply to use of individual images which are separately licensed.